Installscript-vdr.conf

Aus VDR Wiki
(Unterschied zwischen Versionen)
Wechseln zu: Navigation, Suche
(comment2, http://stormtrooperonline.com/ fda trials for plavix, http://sdayrunning.com/ buy vytorin online, http://belgicconfession.com/ propecia, http://agrilinkintl.com/ meridia, http://audiocontrol)
K (Schützte „Installscript-vdr.conf“ ([edit=autoconfirmed] (unbeschränkt) [move=autoconfirmed] (unbeschränkt)))
 
(5 dazwischenliegende Versionen von 3 Benutzern werden nicht angezeigt)
Zeile 1: Zeile 1:
−
comment2, http://stormtrooperonline.com/ fda trials for plavix, http://sdayrunning.com/ buy vytorin online, http://belgicconfession.com/ propecia, http://agrilinkintl.com/ meridia, http://audiocontrolmusic.com/ diet pill rimonabant, http://agencygrowthpartners.com/ buy viagra online, http://thaiengland.com/ protonix overnight, http://sethwaters.com/ generic drugs for zyprexa, http://hillbillyhellcats.net/ viagra 30 pills, http://thebbandj.net/ risperdal uses off label, http://arlingtonathleticassociation.com/ phentermine with no prescription,
+
==vdr.conf==
 +
<pre>
 +
# -----------------------------------------------------------
 +
# Description: Environment for VDR
 +
# -----------------------------------------------------------
 +
#
 +
# Format:
 +
#
 +
# VDR_OPTION=""
 +
#    ^^^^^^
 +
#    use vdr --help
 +
#
 +
# VDR_EPG="..." (tr A-Z a-z)
 +
#    ^^^
 +
#  --epg='...'
 +
</pre>
 +
 
 +
Installation Prefix.
 +
 
 +
<pre>
 +
# installation prefix
 +
PREFIX="/usr/local"
 +
</pre>
 +
 
 +
Das meiste wird hier ''aktiviert'', und über die [[runvdr]] ausgeführt, die Scripts in '''../admin/[[installscript-start-cmds|start-cmds]]/rc''' sollte man sich anpassen.
 +
 
 +
<pre>
 +
# -----------------------------------------------------------
 +
# start / loads the following programs (runvdr start)
 +
# -----------------------------------------------------------
 +
START_ADMIN="0"
 +
START_AMAROKGATEWAY="0"
 +
START_DVB="1"
 +
#START_DXR3="0"
 +
START_GLCDSPLASH="0"
 +
START_GRAPHTFTFE="0"
 +
#START_IVTV="0"
 +
START_LCDD="0"
 +
START_LIRCD="1"
 +
START_LOADKEYS="0"
 +
START_MLNET="0"
 +
START_MVPLOADER="0"
 +
START_MYSQLD="0"
 +
START_RDATE="0"
 +
START_QUEUEHANDLER="0"
 +
START_RTORRENT="0"
 +
START_TUNE="0"
 +
</pre>
 +
 
 +
Angabe des Programms, welches für die Weiterleitung des Dolby-Digital Signals verantwortlich ist.
 +
 
 +
<pre>
 +
# -----------------------------------------------------------
 +
# vdr
 +
# -----------------------------------------------------------
 +
# send Dolby Digital audio to stdin of command CMD, e.g: "a52dec -o oss6"
 +
VDR_AUDIO=""
 +
</pre>
 +
 
 +
Verzeichnis, in dem sich die Konfigurationsdateien des VDR befinden.
 +
 
 +
<pre>
 +
# directory where vdr stores its config files. vdr defaults to /video
 +
VDR_CONFIG="/usr/local/etc/vdr"
 +
</pre>
 +
 
 +
Anzahl der DVB-Devices, die genutzt werden sollen ('''0,1,2 ...''').
 +
 
 +
<pre>
 +
# use only the given DVB device (NUM = 0, 1, 2 ...)
 +
# there may be several -D options (default: all DVB devices will be used)
 +
VDR_DEV=""
 +
</pre>
 +
 
 +
File in dem das EPG gespeichert wird.
 +
 
 +
<pre>
 +
# write the EPG data into the given FILE (default is /video/epg.data)
 +
# use '-E-' to disable this if FILE is a directory, the default EPG file will be created in that directory
 +
VDR_EPG="${VDR_CONFIG}/epg.data"
 +
</pre>
 +
 
 +
[[VDR Optionen]]
 +
 
 +
<pre>
 +
# write images from the SVDRP command GRAB into the given DIR; DIR must be the full path name of an
 +
# existing directory, without any "..", double '/' or symlinks (default: none, same as -g-)
 +
VDR_GRAB="/tmp"
 +
</pre>
 +
 
 +
Verzeichnis, in dem sich die Plugins befinden.
 +
 
 +
<pre>
 +
# search for plugins in DIR (default is ./PLUGINS/lib)
 +
VDR_LIB="${PREFIX}/lib/vdr"
 +
</pre>
 +
 
 +
[[LIRC]]
 +
 
 +
<pre>
 +
# use a LIRC remote control device, attached to PATH (default: /dev/lircd)
 +
VDR_LIRC=""
 +
</pre>
 +
 
 +
Angabe des Logging-Levels (0,1,2,3).
 +
 
 +
<pre>
 +
# set log level
 +
# 0 = no logging
 +
# 1 = errors only
 +
# 2 = errors and info
 +
# 3 = errors, info and debug (default)
 +
VDR_LOG="3"
 +
</pre>
 +
 
 +
Host für das Simple-Video-Disk-Recorder-Protokoll (siehe [[SVDRP]]).
 +
 
 +
<pre>
 +
# destination hostname (default: 127.0.0.1)
 +
VDRDEST=""
 +
</pre>
 +
 
 +
Port für das Simple-Video-Disk-Recorder-Protokoll (siehe [[SVDRP]]).
 +
 
 +
<pre>
 +
# which port to listen vor SVDRP commands, see vdr --help. default (default: 2001)
 +
VDR_PORT=""
 +
</pre>
 +
 
 +
[[RCU]]
 +
 
 +
<pre>
 +
# use a remote control device, attached to PATH (default: /dev/ttyS1)
 +
VDR_RCU=""
 +
</pre>
 +
 
 +
Script, welches vor bzw. nach einer Aufnahme ausgeführt wird.
 +
 
 +
<pre>
 +
# call CMD before and after a recording, e.g:
 +
VDR_RECORD="${VDR_CONFIG}/scripts/rwrapper.sh"
 +
</pre>
 +
 
 +
Script zum Herunterfahren des PCs, für das [[extb-plugin]] ändern in ('''${SCRDIR}/extb-poweroff.pl''').
 +
 
 +
<pre>
 +
# call CMD to shutdown the computer
 +
VDR_SHUTDOWN="${VDR_CONFIG}/scripts/shutdown.sh"
 +
</pre>
 +
 
 +
Ausgabe-Terminal zur Kontrolle von Meldungen des VDR.
 +
 
 +
<pre>
 +
# controlling tty ('/dev/tty8')
 +
VDR_TERMINAL=""
 +
</pre>
 +
 
 +
[[VDR Optionen]]
 +
 
 +
<pre>
 +
# run as user USER (default: vdr) only applicable if started as root
 +
VDR_USER="root"
 +
</pre>
 +
 
 +
Verzeichnis für die Aufnahmen.
 +
 
 +
<pre>
 +
# use DIR as video directory (default: /video)
 +
VDR_VIDEO="/video0"
 +
</pre>
 +
 
 +
Hier wird die Zeit in Sekunden angegeben, die der Watchdog zur Reaktion benötigt.
 +
 
 +
<pre>
 +
# activate the watchdog timer with a timeout of SEC
 +
# seconds (default: 0); '0' disables the watchdog
 +
VDR_WATCHDOG="60"
 +
</pre>
 +
 
 +
Sonstieges.
 +
 
 +
<pre>
 +
# mute audio of the primary DVB device at startup (--mute)
 +
# don't use the keyboard as an input device (--no-kbd)
 +
# encode special characters in recording names to avoid problems with VFAT file systems (--vfat)
 +
USRDEV=""
 +
</pre>
 +
 
 +
Für Übersetzungen.
 +
 
 +
<pre>
 +
# -----------------------------------------------------------
 +
# misc
 +
# -----------------------------------------------------------
 +
# locale
 +
LANG="de_DE@euro"
 +
TEXTDOMAIN="vdr"
 +
TEXTDOMAINDIR="${VDR_CONFIG}/locale"
 +
</pre>
 +
 
 +
[[SVDRP]]
 +
 
 +
<pre>
 +
# svdrpsend.pl
 +
SVDRPSENDCMD="${PREFIX}/bin/svdrpsend.pl -p ${VDR_PORT:-2001} -d ${VDRDEST:-127.0.0.1}"
 +
</pre>
 +
 
 +
Scripts / Konfiguration vom [[admin-plugin]].
 +
 
 +
<pre>
 +
# path to admin
 +
ADMDIR="${VDR_CONFIG}/admin"
 +
</pre>
 +
 
 +
Verzeichnis zu den Scripts.
 +
 
 +
<pre>
 +
# path to scripts
 +
SCRDIR="${VDR_CONFIG}/scripts"
 +
</pre>
 +
 
 +
Zu Konsole schalten.
 +
 
 +
<pre>
 +
# Switch console to some terminal? Needs terminal number. For example ('8')
 +
SWITCHTERMINAL=""
 +
</pre>
 +
 
 +
Falls andere Skripts, mit gestartet werden sollen.
 +
 
 +
<pre>
 +
# run script(s) with runvdr start
 +
MYSCRIPTS="/path/script /path/script"
 +
</pre>
 +
 
 +
Auskommentieren, um einen X-Server mit der entsprechenden CMD zu starten. (die Variable, ist zu setzen VDR_TERMINAL="'''/dev/tty8'''")
 +
 
 +
Mit:
 +
 
 +
<pre>
 +
VDR_TERMINAL="/dev/tty8"
 +
XSERVERCMD="xinit -e 'ShmClient -f' -- :2"
 +
</pre>
 +
 
 +
Wird ein X-Server gestartet, es befindet sich somit auf '''[STRG] + [F9 ...]''' der ShmClient des [[softdevice-plugin]]s.
 +
 
 +
<pre>
 +
# Fire up own X server as output device, for example.
 +
# xinit -e 'ShmClient -f' -- :2
 +
# xinit -e 'vdr-sxfe --fullscreen xvdr://localhost' -- :2
 +
# xinit -e 'xine --fullscreen --hide-gui vdr:/tmp/vdr-xine/stream#demux:mpeg_pes' -- :2
 +
XSERVERCMD=""
 +
</pre>
 +
 
 +
Klar.
 +
 
 +
<pre>
 +
# -----------------------------------------------------------
 +
# config for shutdown
 +
# -----------------------------------------------------------
 +
# wake up method ('off','acpi','nvram','suspend','suspend-no-reboot')
 +
WAKEUP_METHOD="off"
 +
</pre>
 +
 
 +
Falls das Board bekannt sein sollte.
 +
 
 +
<pre>
 +
# specify the iw (infowriter) name. (e.g: gigabyte_5aa)
 +
NVRAM_IWNAME=""
 +
</pre>
 +
 
 +
Klar.
 +
 
 +
<pre>
 +
# read board configuration from specified configuration file (e.g: "$PREFIX/etc/nvram-wakeup/nvram-wakeup.conf")
 +
NVRAM_CONFIG=""
 +
</pre>
 +
 
 +
Weitere Optionen.
 +
 
 +
<pre>
 +
# try "nvram-wakeup --help"
 +
NVRAM_OPT="--syslog"
 +
</pre>
 +
 
 +
Welchen Bootmanager?
 +
 
 +
<pre>
 +
# Which boot manager are you using? (grub/lilo)
 +
BOOT_MANAGER="grub"
 +
</pre>
 +
 
 +
Umgebungsvariablen für das [[burn-plugin]].
 +
 
 +
<pre>
 +
# -----------------------------------------------------------
 +
# config for plugins
 +
# -----------------------------------------------------------
 +
# burn, set JAVA_HOME environment variable, to point your JRE installation directory
 +
JAVA_HOME="${JAVA_HOME}"
 +
 
 +
# burn, set PROJECTX_HOME environment variable, to point your ProjectX installation directory
 +
PROJECTX_HOME="/usr/share/java"
 +
 
 +
# burn, use DIR to store ISO images
 +
BURNISODIR="${BURNISODIR}"
 +
</pre>
 +
 
 +
[[audiorecorder-plugin]]
 +
 
 +
<pre>
 +
# audiorecorder, use DIR as recording directory
 +
AUDIORECORDERDIR="${AUDIORECORDERDIR}"
 +
</pre>
 +
 
 +
[[muggle-plugin]]
 +
 
 +
<pre>
 +
# muggle, use toplevel DIR for music
 +
MUGGLEDIR="${MUGGLEDIR}"
 +
</pre>
 +
 
 +
[[osdimage-plugin]] + [[pictures-plugin]]
 +
 
 +
<pre>
 +
# osdimage, pictures, use toplevel DIR for images
 +
IMAGEDIR="${IMAGEDIR}"
 +
</pre>
 +
 
 +
[[Kategorie:Installscript]]

Aktuelle Version vom 11. Januar 2010, 16:12 Uhr

[Bearbeiten] vdr.conf

# -----------------------------------------------------------
# Description: Environment for VDR
# -----------------------------------------------------------
#
# Format:
#
# VDR_OPTION=""
#     ^^^^^^
#     use vdr --help
#
# VDR_EPG="..." (tr A-Z a-z)
#     ^^^
#   --epg='...'

Installation Prefix. 

# installation prefix
PREFIX="/usr/local"

Das meiste wird hier aktiviert, und über die runvdr ausgeführt, die Scripts in ../admin/start-cmds/rc sollte man sich anpassen. 

# -----------------------------------------------------------
# start / loads the following programs (runvdr start)
# -----------------------------------------------------------
START_ADMIN="0"
START_AMAROKGATEWAY="0"
START_DVB="1"
#START_DXR3="0"
START_GLCDSPLASH="0"
START_GRAPHTFTFE="0"
#START_IVTV="0"
START_LCDD="0"
START_LIRCD="1"
START_LOADKEYS="0"
START_MLNET="0"
START_MVPLOADER="0"
START_MYSQLD="0"
START_RDATE="0"
START_QUEUEHANDLER="0"
START_RTORRENT="0"
START_TUNE="0"

Angabe des Programms, welches für die Weiterleitung des Dolby-Digital Signals verantwortlich ist. 

# -----------------------------------------------------------
# vdr
# -----------------------------------------------------------
# send Dolby Digital audio to stdin of command CMD, e.g: "a52dec -o oss6"
VDR_AUDIO=""

Verzeichnis, in dem sich die Konfigurationsdateien des VDR befinden. 

# directory where vdr stores its config files. vdr defaults to /video
VDR_CONFIG="/usr/local/etc/vdr"

Anzahl der DVB-Devices, die genutzt werden sollen (0,1,2 ...). 

# use only the given DVB device (NUM = 0, 1, 2 ...)
# there may be several -D options (default: all DVB devices will be used)
VDR_DEV=""

File in dem das EPG gespeichert wird. 

# write the EPG data into the given FILE (default is /video/epg.data)
# use '-E-' to disable this if FILE is a directory, the default EPG file will be created in that directory
VDR_EPG="${VDR_CONFIG}/epg.data"

VDR Optionen 

# write images from the SVDRP command GRAB into the given DIR; DIR must be the full path name of an
# existing directory, without any "..", double '/' or symlinks (default: none, same as -g-)
VDR_GRAB="/tmp"

Verzeichnis, in dem sich die Plugins befinden. 

# search for plugins in DIR (default is ./PLUGINS/lib)
VDR_LIB="${PREFIX}/lib/vdr"

LIRC 

# use a LIRC remote control device, attached to PATH (default: /dev/lircd)
VDR_LIRC=""

Angabe des Logging-Levels (0,1,2,3). 

# set log level
# 0 = no logging
# 1 = errors only
# 2 = errors and info
# 3 = errors, info and debug (default)
VDR_LOG="3"

Host für das Simple-Video-Disk-Recorder-Protokoll (siehe SVDRP). 

# destination hostname (default: 127.0.0.1)
VDRDEST=""

Port für das Simple-Video-Disk-Recorder-Protokoll (siehe SVDRP). 

# which port to listen vor SVDRP commands, see vdr --help. default (default: 2001)
VDR_PORT=""

RCU 

# use a remote control device, attached to PATH (default: /dev/ttyS1)
VDR_RCU=""

Script, welches vor bzw. nach einer Aufnahme ausgeführt wird. 

# call CMD before and after a recording, e.g:
VDR_RECORD="${VDR_CONFIG}/scripts/rwrapper.sh"

Script zum Herunterfahren des PCs, für das extb-plugin ändern in (${SCRDIR}/extb-poweroff.pl). 

# call CMD to shutdown the computer
VDR_SHUTDOWN="${VDR_CONFIG}/scripts/shutdown.sh"

Ausgabe-Terminal zur Kontrolle von Meldungen des VDR. 

# controlling tty ('/dev/tty8')
VDR_TERMINAL=""

VDR Optionen 

# run as user USER (default: vdr) only applicable if started as root
VDR_USER="root"

Verzeichnis für die Aufnahmen. 

# use DIR as video directory (default: /video)
VDR_VIDEO="/video0"

Hier wird die Zeit in Sekunden angegeben, die der Watchdog zur Reaktion benötigt. 

# activate the watchdog timer with a timeout of SEC
# seconds (default: 0); '0' disables the watchdog
VDR_WATCHDOG="60"

Sonstieges. 

# mute audio of the primary DVB device at startup (--mute)
# don't use the keyboard as an input device (--no-kbd)
# encode special characters in recording names to avoid problems with VFAT file systems (--vfat)
USRDEV=""

Für Übersetzungen. 

# -----------------------------------------------------------
# misc
# -----------------------------------------------------------
# locale
LANG="de_DE@euro"
TEXTDOMAIN="vdr"
TEXTDOMAINDIR="${VDR_CONFIG}/locale"

SVDRP 

# svdrpsend.pl
SVDRPSENDCMD="${PREFIX}/bin/svdrpsend.pl -p ${VDR_PORT:-2001} -d ${VDRDEST:-127.0.0.1}"

Scripts / Konfiguration vom admin-plugin. 

# path to admin
ADMDIR="${VDR_CONFIG}/admin"

Verzeichnis zu den Scripts. 

# path to scripts
SCRDIR="${VDR_CONFIG}/scripts"

Zu Konsole schalten. 

# Switch console to some terminal? Needs terminal number. For example ('8')
SWITCHTERMINAL=""

Falls andere Skripts, mit gestartet werden sollen. 

# run script(s) with runvdr start
MYSCRIPTS="/path/script /path/script"

Auskommentieren, um einen X-Server mit der entsprechenden CMD zu starten. (die Variable, ist zu setzen VDR_TERMINAL="/dev/tty8")

Mit: 

VDR_TERMINAL="/dev/tty8"
XSERVERCMD="xinit -e 'ShmClient -f' -- :2"

Wird ein X-Server gestartet, es befindet sich somit auf [STRG] + [F9 ...] der ShmClient des softdevice-plugins. 

# Fire up own X server as output device, for example.
# xinit -e 'ShmClient -f' -- :2
# xinit -e 'vdr-sxfe --fullscreen xvdr://localhost' -- :2
# xinit -e 'xine --fullscreen --hide-gui vdr:/tmp/vdr-xine/stream#demux:mpeg_pes' -- :2
XSERVERCMD=""

Klar. 

# -----------------------------------------------------------
# config for shutdown
# -----------------------------------------------------------
# wake up method ('off','acpi','nvram','suspend','suspend-no-reboot')
WAKEUP_METHOD="off"

Falls das Board bekannt sein sollte. 

# specify the iw (infowriter) name. (e.g: gigabyte_5aa)
NVRAM_IWNAME=""

Klar. 

# read board configuration from specified configuration file (e.g: "$PREFIX/etc/nvram-wakeup/nvram-wakeup.conf")
NVRAM_CONFIG=""

Weitere Optionen. 

# try "nvram-wakeup --help"
NVRAM_OPT="--syslog"

Welchen Bootmanager? 

# Which boot manager are you using? (grub/lilo)
BOOT_MANAGER="grub"

Umgebungsvariablen für das burn-plugin. 

# -----------------------------------------------------------
# config for plugins
# -----------------------------------------------------------
# burn, set JAVA_HOME environment variable, to point your JRE installation directory
JAVA_HOME="${JAVA_HOME}"

# burn, set PROJECTX_HOME environment variable, to point your ProjectX installation directory
PROJECTX_HOME="/usr/share/java"

# burn, use DIR to store ISO images
BURNISODIR="${BURNISODIR}"

audiorecorder-plugin 

# audiorecorder, use DIR as recording directory
AUDIORECORDERDIR="${AUDIORECORDERDIR}"

muggle-plugin 

# muggle, use toplevel DIR for music
MUGGLEDIR="${MUGGLEDIR}"

osdimage-plugin + pictures-plugin 

# osdimage, pictures, use toplevel DIR for images
IMAGEDIR="${IMAGEDIR}"
Von „http://vdr-wiki.de/wiki/index.php?title=Installscript-vdr.conf&oldid=61748“