Vdr(1)

Aus VDR Wiki
(Unterschied zwischen Versionen)
Wechseln zu: Navigation, Suche
(→‎FILES)
(→‎DESCRIPTION)
 
(8 dazwischenliegende Versionen von 2 Benutzern werden nicht angezeigt)
Zeile 1: Zeile 1:
−
NUR COPY AND PASTE BIS JETZT!! UNFERTIG.
+
=vdr(1) - Linux man page=
  
 +
Section: Video Disk Recorder (1)<br />Updated: 31 Mar 2013<br />
  
 +
----
 +
 +
 
  
−
=vdr(1) - Linux man page=
 
 
==NAME==
 
==NAME==
−
'''vdr''' - the Video Disk Recorder
 
  
−
==SYNOPSIS==  
+
vdr - the Video Disk Recorder  
−
'''vdr''' [options]
+
 
 +
==SYNOPSIS==
 +
 
 +
'''vdr''' [options]  
 +
 
 +
==DESCRIPTION==
 +
 
 +
'''vdr''' implements a complete digital Set-Top Box and Video Recorder. It can work with signals received from satellites ([[DVB-S]]) as well as cable ([[DVB-C]]) and terrestrial ([[DVB-T]]) signals.
 +
 
 +
At least one DVB card is required to run '''vdr'''. With it you can watch live TV while recording one or more other broadcasts from the same transponder. It is also possible to start watching a recorded programme before the live broadcast has ended ('''time shifting'''). In order to record from different transponders simultaneously two or more DVB cards are necessary. By default '''vdr''' can support up to eight DVB cards. The primary DVB card (the one your TV set is connected to) can either be a "full featured" card, which means it contains an MPEG decoder and provides audio and video signal outputs, or you can use some third party plugin that implements software decoding of the MPEG data and displays it via the system's graphics adapter.
 +
 
 +
'''vdr''' uses an On Screen Display (OSD) to display its menus. It can be controlled by the PC keyboard, the "Linux Infrared Remote Control" (LIRC), or any other means of remote control, implemented by a third party plugin.
 +
 
 +
Remote access is possible via the "Simple Video Disk Recorder Protocol" ([[SVDRP]]), which can be accessed on port 6419, for instance by '''telnet'''.  
 +
 
 +
==OPTIONS==
 +
 
 +
; '''-a '''''cmd''''', --audio='''''cmd''
 +
: Send Dolby Digital audio to stdin of command ''cmd''.
 +
; '''--cachedir='''''dir''
 +
: Save cache files in ''dir'' (default is to save them in the video directory).
 +
; '''-c '''''dir''''', --config='''''dir''
 +
: Read config files from directory ''dir'' (default is to read them from the video directory).
 +
; '''-d, --daemon'''
 +
: Run in daemon mode (implies --no-kbd).
 +
; '''-D '''''num''''', --device='''''num''
 +
: Use only the given DVB device (''num'' = 0, 1, 2...). There may be several '''-D''' options (by default all DVB devices will be used).
 +
; '''--dirnames='''''path'''''[,'''''name'''''[,'''''enc''''']]'''
 +
: Set the maximum directory path length to ''path'' (default is the maximum value allowed on the system). If ''name'' is also given, it defines the maximum directory name length (default is the maximum value allowed on the system). The optional ''enc'' can be 0 or 1, and controls whether special characters in directory names are encoded as hex values (default: 0). If ''path'' or ''name'' are left empty (as in ",,1" to only set ''enc''), the defaults apply. The length of the video directory name and that of the actual recording directory is subtracted from ''path'', to make sure the directory path will never become too long.
 +
; '''--edit='''''rec''
 +
: Edit the given recording. ''rec'' must be the full path name of an existing recording. The program will return immediately after editing the recording.
 +
; '''-E '''''file''''', --epgfile='''''file''
 +
: Write the EPG data into the given ''file'' (default is ''epg.data'' in the cache directory). Use '''-E-''' to disable this. If ''file'' is a directory, the file ''epg.data'' will be created in that directory.
 +
; '''--filesize='''''size''
 +
: Limit video files to ''size'' bytes (default is 2000M). This option is only useful in conjunction with --edit, and must precede that option to have an effect. ''size'' is an integer number and may be followed by one of the letters K, M, G or T to abbreviate Kilo-, Mega-, Giga- or Terabyte, respectively. The given value is silently limited to the program's internal minimum and maximum values.
 +
; '''--genindex='''''rec''
 +
: Generate the index file for the given recording. ''rec'' must be the full path name of an existing recording. The recording must be in TS format. If the recording already has an index file, it will be deleted before creating the new one. The program will return immediately after generating the index. Note that using this option while another instance of VDR is currently replaying the given recording, or if the recording has not been finished yet, may lead to unexpected results.
 +
; '''-g, --grab='''''dir''
 +
: Write images from the SVDRP command GRAB into the given directory ''dir''. ''dir'' must be the full path name of an existing directory, without any "..", double '/' or symlinks. By default, or if '''-g-''' is given, grabbing images to disk is disabled.
 +
; '''-h, --help'''
 +
: Print a help message and exit.
 +
; '''-i '''''instance''''', --instance='''''instance''
 +
: Use ''instance'' as the id of this VDR instance (default is 0). In an environment where several instances of VDR use the same video directory, this parameter can be set to a positive integer value that's unique for each instance, so that they won't interfere with each other in case they record exactly the same broadcast. The number given here will be part of the directory name in which the recordings will be stored.
 +
; '''-l '''''level''''', --log='''''level''
 +
: Set logging to ''level''. '''0''' = no logging, '''1''' = errors only, '''2''' = errors and info, '''3''' = errors, info and debug. The default logging level is '''3'''. If logging should be done to LOG_LOCAL''n'' instead of LOG_USER, add '.n' to LEVEL, as in 3.7 (n=0..7).
 +
; '''-L '''''dir''''', --lib='''''dir''
 +
: Search for plugins in directory ''dir'' (default is ./PLUGINS/lib). There can be several '''-L''' options with different ''dir'' values. Each of them will apply to the '''-P''' options following it.
 +
; '''--lirc[='''''path''''']'''
 +
: Use a LIRC remote control device. If ''path'' is omitted, vdr uses ''/var/run/lirc/lircd''.
 +
; '''--localedir='''''dir''
 +
: Search for locale files in ''dir'' (default is ./locale).
 +
; '''-m, --mute'''
 +
: Mute audio of the primary DVB device at startup.
 +
; '''--no-kbd'''
 +
: Don't use the keyboard as an input device.
 +
; '''-p '''''port''''', --port='''''port''
 +
: Use ''port'' for SVDRP. A value of '''0''' turns off SVDRP. The default SVDRP port is '''6419'''. You need to edit the file ''svdrphosts.conf'' in order to enable access to the SVDRP port.
 +
; '''-P '''''options''''', --plugin='''''options''
 +
: Load a plugin, defined by the given ''options''. The first word in ''options'' must be the name of an existing '''vdr''' plugin, optionally followed by a blank separated list of command line options for that plugin. If ''options'' contains any blanks, you need to enclose it in quotes, like for example '''vdr -P "abc -a -b xyz"'''which would load a plugin named '''abc''', giving it the command line options '''-a -b xyz'''. If you want to load all available plugins (without any particular options) you can use'''vdr -P "*"'''(note the quotes around the asterisk to prevent wildcard expansion).
 +
; '''-r '''''cmd''''', --record='''''cmd''
 +
: Call ''cmd'' before and after a recording. See the file ''INSTALL'' for more information.
 +
; '''--resdir='''''dir''
 +
: Read resource files from ''dir'' (default is to read them from the config directory).
 +
; '''-s '''''cmd''''', --shutdown='''''cmd''
 +
: Call ''cmd'' to shutdown the computer. See the file ''INSTALL'' for more information.
 +
; '''--split'''
 +
: Split edited files at the editing marks. This option is only useful in conjunction with --edit, and must precede that option to have an effect.
 +
; '''-t '''''tty''''', --terminal='''''tty''
 +
: Set the controlling terminal.
 +
; '''-u '''''user''''', --user='''''user''
 +
: Run as user ''user'' in case vdr was started as user 'root'. Starting vdr as 'root' is necessary if the system time shall be set from the transponder data, but for security reasons vdr can switch to a lesser privileged user id during normal operation.
 +
; '''--userdump'''
 +
: Allow coredumps if -u is given (only for debugging).
 +
; '''--vfat'''
 +
: For backwards compatibility (same as --dirnames= 250,40,1.
 +
; '''-v '''''dir''''', --video='''''dir''
 +
: Use ''dir'' as video directory. The default is ''/video''.
 +
; '''-V, --version'''
 +
: Print version information and exit.
 +
; '''-w '''''sec''''', --watchdog='''''sec''
 +
: Activate the watchdog timer with a timeout of ''sec'' seconds. A value of '''0''' (default) disables the watchdog.
 +
 
 +
 
 +
 
 +
==SIGNALS==
 +
 
 +
; '''SIGINT, SIGTERM'''
 +
: Program exits with status 0.
 +
; '''SIGHUP'''
 +
: Program exits with status 1. This can be used to force a reload, for example if an update has been installed.
 +
 
 +
 
 +
 
 +
==EXIT STATUS==
  
−
==DESCRIPTION==
+
; '''0'''
−
'''vdr''' implements a complete digital Set-Top Box and Video Recorder. It can work with signals received from satellites (DVB-S) as well as cable (DVB-C) and terrestrial (DVB-T) signals.
+
: Successful program execution.
 +
; '''1'''
 +
: An error has been detected which requires the DVB driver and '''vdr''' to be reloaded.
 +
; '''2'''
 +
: An non-recoverable error has been detected, '''vdr''' has given up.
  
−
At least one DVB card is required to run '''vdr'''. With it you can watch live tv while recording one or more other broadcasts from the same transponder. It is also possible to start watching a recorded programme before the live broadcast has ended ('''time shifting'''). In order to record from different transponders simultaneously two or more DVB cards are necessary. By default '''vdr''' can support up to four DVB cards. The primary DVB card (the one your tv set is connected to) has to be a "full featured" card, which means it must contain an MPEG decoder and provide audio and video signal outputs.
+
 
  
−
'''vdr''' uses the On Screen Display of the DVB card to display its menus. It can be controlled by the PC keyboard, a home built [[RCU|"Remote Control Unit" (RCU)]] or the [[LIRC|"Linux Infrared Remote Control" (LIRC)]].
+
==FILES==
  
−
Remote access is possible via the [[SVDRP|"Simple Video Disk Recorder Protocol" (SVDRP)]], which can be accessed on port 2001, for instance by '''telnet'''.
+
; ''[[channels.conf]]''
 +
: Channel configuration.
 +
; ''[[timers.conf]]''
 +
: Timer configuration.
 +
; ''[[setup.conf]]''
 +
: User definable setup.
 +
; ''[[commands.conf]]''
 +
: User definable commands (executed from the '''Commands''' menu).
 +
; ''[[svdrphosts.conf]]''
 +
: SVDRP host configuration, defining which hosts or networks are given access to the SVDRP port.
 +
; ''[[marks]]''
 +
: Contains the editing marks defined for a recording.
 +
; ''[[info]]''
 +
: Contains a description of the recording.
 +
; ''[[resume]]''
 +
: Contains the index into the recording where the last replay session left off.
 +
; ''[[index]]''
 +
: Contains the file number, offset and type of each frame of the recording.
 +
; ''[[remote.conf]]''
 +
: Contains the key assignments for the remote control.
 +
; ''[[keymacros.conf]]''
 +
: Contains user defined remote control key macros.
 +
; ''00001.ts ''... ''65535.ts''
 +
: The actual data files of a recording.
 +
; ''[[epg.data]]''
 +
: Contains all current EPG data. Can be used for external processing and will also be read at program startup to have the full EPG data available immediately.
 +
; ''.update''
 +
: If this file is present in the video directory, its last modification time will be used to trigger an update of the list of recordings in the "Recordings" menu.
  
−
=OPTIONS=
+
 
−
:'''-a''' ''cmd'', '''--audio'''=''cmd''
+
−
::Send Dolby Digital audio to stdin of command ''cmd''.
+
−
:'''-c''' ''dir'', '''--config'''=''dir''
+
−
::Read config files from directory ''dir'' (default is to read them from video directory).
+
−
:'''-d''', '''--daemon'''
+
−
::Run in daemon mode (implies --no-kbd).
+
−
:'''-D''' ''num'', '''--device'''=''num''
+
−
::Use only the given DVB device (''num'' = 0, 1, 2...). There may be several '''-D''' options (by default all DVB devices will be used).
+
−
:'''-E''' ''file'', '''--epgfile'''=''file''
+
−
::Write the EPG data into the given ''file'' (default is ''/video/epg.data''). Use '''-E-''' to disable this. If ''file'' is a directory, the file [[epg.data]] will be created in that directory.
+
−
:'''-g''', '''--grab'''=''dir''
+
−
::Write images from the [[SVDRP]] command GRAB into the given directory ''dir''. ''dir'' must be the full path
+
−
::name of an existing directory, without any "..", double '/' or symlinks. By default, or if '''-g-''' is
+
−
::given, grabbing images to disk is disabled.
+
−
:'''-h''', '''--help'''
+
−
::Print a help message and exit.
+
−
:'''-l''' ''level'', '''--log'''=''level''
+
−
::Set logging to ''level''. '''0''' = no logging, '''1''' = errors only, '''2''' = errors and info, '''3''' = errors, info and
+
−
::debug. The default logging level is '''3'''. If logging should be done to LOG_LOCALn instead of
+
−
::LOG_USER, add '.n' to LEVEL, as in 3.7 (n=0..7).
+
−
:'''-L''' ''dir'', '''--lib'''=''dir''
+
−
::Search for plugins in directory ''dir'' (default is ''./PLUGINS/lib''). There can be several '''-L''' options
+
−
::with different ''dir'' values. Each of them will apply to the '''-P''' options following it.
+
−
:'''--lirc'''[=''path'']
+
−
::Use a [[LIRC]] remote control device. If ''path'' is omitted, vdr uses ''/dev/lircd''.
+
−
:'''-m''', '''--mute'''
+
−
::Mute audio of the primary DVB device at startup.
+
−
:'''--no-kbd'''
+
−
::Don't use the keyboard as an input device.
+
−
:'''-p''' ''port'', '''--port'''=''port''
+
−
::Use ''port'' for [[SVDRP]]. A value of '''0''' turns off [[SVDRP]]. The default [[SVDRP]] port is '''2001'''.
+
−
::You need to edit the file [[svdrphosts.conf]] in order to enable access to the [[SVDRP]] port.
+
−
:'''-P''' ''options'', '''--plugin'''=''options''
+
−
::Load a [[plugins|plugin]], defined by the given ''options''. The first word in ''options'' must be the name of an
+
−
::existing '''vdr''' plugin, optionally followed by a blank separated list of command line options for
+
−
::that plugin. If ''options'' contains any blanks, you need to enclose it in quotes, like for example
+
  
−
::'''vdr -P "abc -a -b xyz" '''
+
==SEE ALSO==
  
−
::which would load a plugin named '''abc''', giving it the command line options '''-a -b xyz'''. If you want to
+
'''[[vdr(5)]]'''
−
::load all available plugins (without any particular options) you can use
+
  
−
::'''vdr -P "*" '''
+
==AUTHOR==
  
−
::(note the quotes around the asterisk to prevent wildcard expansion).  
+
Written by Klaus Schmidinger, with contributions from many others. See the file ''CONTRIBUTORS'' in the '''vdr''' source distribution.  
  
−
:'''--rcu'''[=''path'']
+
==REPORTING BUGS==
−
::Use a serial port remote control device. If ''path'' is omitted, vdr uses /dev/ttyS1.
+
−
:'''-r''' ''cmd'', '''--record'''=''cmd''
+
−
::Call'' cmd'' before and after a recording. See the file '''INSTALL''' for more information.
+
−
+
−
:'''-s''' ''cmd'', '''--shutdown'''=''cmd''
+
−
::Call ''cmd'' to shutdown the computer. See the file '''INSTALL''' for more information.
+
−
:'''-t''' ''tty'', '''--terminal'''=''tty''
+
−
::Set the controlling terminal.
+
−
:'''-u''' ''user'', '''--user'''=''user''
+
−
::Run as user ''user'' in case '''vdr''' was started as user 'root'. Starting '''vdr''' as 'root'
+
−
::is necessary if the system time shall be set from the transponder data, but for security reasons
+
−
::'''vdr''' can switch to a lesser privileged user id during normal operation.
+
−
:'''--vfat'''
+
−
::Encode special characters in recording names to avoid problems with VFAT file systems.
+
−
:'''-v''' ''dir'', '''--video'''=''dir''
+
−
::Use ''dir'' as video directory. The default is ''/video''.
+
−
:'''-V''', '''--version'''
+
−
::Print version information and exit.
+
−
:'''-w''' ''sec'',''' --watchdog'''=''sec''
+
−
::Activate the watchdog timer with a timeout of ''sec'' seconds. A value of '''0''' (default) disables
+
−
::the watchdog.
+
  
−
=SIGNALS=
+
Report bugs to vdr-bugs@tvdr.de.  
−
:'''SIGINT''', '''SIGTERM'''
+
−
::Program exits with status 0.
+
−
:'''SIGHUP'''
+
−
::Program exits with status 1. This can be used to force a reload, for example
+
−
::if an update has been installed.
+
−
=EXIT STATUS=
+
−
:'''0'''
+
−
::Successful program execution.
+
−
:'''1'''
+
−
::An error has been detected which requires the DVB driver and '''vdr''' to be reloaded.  
+
−
:'''2'''
+
−
::An non-recoverable error has been detected, vdr has given up.
+
  
−
=FILES=
+
==COPYRIGHT==
−
:[[channels.conf]]
+
−
::Channel configuration.
+
−
:[[timers.conf]]
+
−
::Timer configuration.
+
−
:[[setup.conf]]
+
−
::User definable setup.
+
−
:[[commands.conf]]
+
−
::User definable commands (executed from the ''Commands'' menu).
+
−
:[[svdrphosts.conf]]
+
−
::[[SVDRP]] host configuration, defining which hosts or networks are given access to the [[SVDRP]] port.
+
−
:[[marks.vdr]]
+
−
::Contains the editing marks defined for a recording.
+
−
:[[info.vdr]]
+
−
::Contains a description of the recording.
+
−
:[[resume.vdr]]
+
−
::Contains the index into the recording where the last replay session left off.
+
−
:[[index.vdr]]
+
−
::Contains the file number, offset and type of each frame of the recording.
+
−
:[[remote.conf]]
+
−
::Contains the key assignments for the remote control.
+
−
:[[keymacros.conf]]
+
−
::Contains user defined remote control key macros.
+
−
:''001.vdr ... 255.vdr''
+
−
::The actual data files of a recording.
+
−
:[[epg.data]]
+
−
::Contains all current EPG data. Can be used for external processing and will also be read at program startup to have the full EPG data available immediately.
+
−
:''.update''
+
−
::If this file is present in the video directory, its last modification time will be used to trigger an update of the list of recordings in the "Recordings" menu.
+
  
−
=SEE ALSO=
+
Copyright © 2013 Klaus Schmidinger.
−
[[vdr(5)]]
+
  
−
=AUTHOR=
+
This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
−
Written by Klaus Schmidinger, with contributions from many others.
+
−
See the file CONTRIBUTORS in the vdr source distribution.
+
−
+
−
=REPORTING BUGS=
+
−
Report bugs to <vdr-bugs@cadsoft.de>.
+
−
+
−
=COPYRIGHT=
+
  
−
Copyright © 2006 Klaus Schmidinger.
 
  
−
This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or
+
[[Kategorie:VDR]]
−
FITNESS FOR A PARTICULAR PURPOSE.
+

Aktuelle Version vom 31. März 2013, 12:57 Uhr

Inhaltsverzeichnis

[Bearbeiten] vdr(1) - Linux man page

Section: Video Disk Recorder (1)
Updated: 31 Mar 2013

 

[Bearbeiten] NAME

vdr - the Video Disk Recorder  

[Bearbeiten] SYNOPSIS

vdr [options]  

[Bearbeiten] DESCRIPTION

vdr implements a complete digital Set-Top Box and Video Recorder. It can work with signals received from satellites (DVB-S) as well as cable (DVB-C) and terrestrial (DVB-T) signals.

At least one DVB card is required to run vdr. With it you can watch live TV while recording one or more other broadcasts from the same transponder. It is also possible to start watching a recorded programme before the live broadcast has ended (time shifting). In order to record from different transponders simultaneously two or more DVB cards are necessary. By default vdr can support up to eight DVB cards. The primary DVB card (the one your TV set is connected to) can either be a "full featured" card, which means it contains an MPEG decoder and provides audio and video signal outputs, or you can use some third party plugin that implements software decoding of the MPEG data and displays it via the system's graphics adapter.

vdr uses an On Screen Display (OSD) to display its menus. It can be controlled by the PC keyboard, the "Linux Infrared Remote Control" (LIRC), or any other means of remote control, implemented by a third party plugin.

Remote access is possible via the "Simple Video Disk Recorder Protocol" (SVDRP), which can be accessed on port 6419, for instance by telnet.  

[Bearbeiten] OPTIONS

-a cmd, --audio=cmd
Send Dolby Digital audio to stdin of command cmd.
--cachedir=dir
Save cache files in dir (default is to save them in the video directory).
-c dir, --config=dir
Read config files from directory dir (default is to read them from the video directory).
-d, --daemon
Run in daemon mode (implies --no-kbd).
-D num, --device=num
Use only the given DVB device (num = 0, 1, 2...). There may be several -D options (by default all DVB devices will be used).
--dirnames=path[,name[,enc]]
Set the maximum directory path length to path (default is the maximum value allowed on the system). If name is also given, it defines the maximum directory name length (default is the maximum value allowed on the system). The optional enc can be 0 or 1, and controls whether special characters in directory names are encoded as hex values (default: 0). If path or name are left empty (as in ",,1" to only set enc), the defaults apply. The length of the video directory name and that of the actual recording directory is subtracted from path, to make sure the directory path will never become too long.
--edit=rec
Edit the given recording. rec must be the full path name of an existing recording. The program will return immediately after editing the recording.
-E file, --epgfile=file
Write the EPG data into the given file (default is epg.data in the cache directory). Use -E- to disable this. If file is a directory, the file epg.data will be created in that directory.
--filesize=size
Limit video files to size bytes (default is 2000M). This option is only useful in conjunction with --edit, and must precede that option to have an effect. size is an integer number and may be followed by one of the letters K, M, G or T to abbreviate Kilo-, Mega-, Giga- or Terabyte, respectively. The given value is silently limited to the program's internal minimum and maximum values.
--genindex=rec
Generate the index file for the given recording. rec must be the full path name of an existing recording. The recording must be in TS format. If the recording already has an index file, it will be deleted before creating the new one. The program will return immediately after generating the index. Note that using this option while another instance of VDR is currently replaying the given recording, or if the recording has not been finished yet, may lead to unexpected results.
-g, --grab=dir
Write images from the SVDRP command GRAB into the given directory dir. dir must be the full path name of an existing directory, without any "..", double '/' or symlinks. By default, or if -g- is given, grabbing images to disk is disabled.
-h, --help
Print a help message and exit.
-i instance, --instance=instance
Use instance as the id of this VDR instance (default is 0). In an environment where several instances of VDR use the same video directory, this parameter can be set to a positive integer value that's unique for each instance, so that they won't interfere with each other in case they record exactly the same broadcast. The number given here will be part of the directory name in which the recordings will be stored.
-l level, --log=level
Set logging to level. 0 = no logging, 1 = errors only, 2 = errors and info, 3 = errors, info and debug. The default logging level is 3. If logging should be done to LOG_LOCALn instead of LOG_USER, add '.n' to LEVEL, as in 3.7 (n=0..7).
-L dir, --lib=dir
Search for plugins in directory dir (default is ./PLUGINS/lib). There can be several -L options with different dir values. Each of them will apply to the -P options following it.
--lirc[=path]
Use a LIRC remote control device. If path is omitted, vdr uses /var/run/lirc/lircd.
--localedir=dir
Search for locale files in dir (default is ./locale).
-m, --mute
Mute audio of the primary DVB device at startup.
--no-kbd
Don't use the keyboard as an input device.
-p port, --port=port
Use port for SVDRP. A value of 0 turns off SVDRP. The default SVDRP port is 6419. You need to edit the file svdrphosts.conf in order to enable access to the SVDRP port.
-P options, --plugin=options
Load a plugin, defined by the given options. The first word in options must be the name of an existing vdr plugin, optionally followed by a blank separated list of command line options for that plugin. If options contains any blanks, you need to enclose it in quotes, like for example vdr -P "abc -a -b xyz"which would load a plugin named abc, giving it the command line options -a -b xyz. If you want to load all available plugins (without any particular options) you can usevdr -P "*"(note the quotes around the asterisk to prevent wildcard expansion).
-r cmd, --record=cmd
Call cmd before and after a recording. See the file INSTALL for more information.
--resdir=dir
Read resource files from dir (default is to read them from the config directory).
-s cmd, --shutdown=cmd
Call cmd to shutdown the computer. See the file INSTALL for more information.
--split
Split edited files at the editing marks. This option is only useful in conjunction with --edit, and must precede that option to have an effect.
-t tty, --terminal=tty
Set the controlling terminal.
-u user, --user=user
Run as user user in case vdr was started as user 'root'. Starting vdr as 'root' is necessary if the system time shall be set from the transponder data, but for security reasons vdr can switch to a lesser privileged user id during normal operation.
--userdump
Allow coredumps if -u is given (only for debugging).
--vfat
For backwards compatibility (same as --dirnames= 250,40,1.
-v dir, --video=dir
Use dir as video directory. The default is /video.
-V, --version
Print version information and exit.
-w sec, --watchdog=sec
Activate the watchdog timer with a timeout of sec seconds. A value of 0 (default) disables the watchdog.

 

[Bearbeiten] SIGNALS

SIGINT, SIGTERM
Program exits with status 0.
SIGHUP
Program exits with status 1. This can be used to force a reload, for example if an update has been installed.

 

[Bearbeiten] EXIT STATUS

0
Successful program execution.
1
An error has been detected which requires the DVB driver and vdr to be reloaded.
2
An non-recoverable error has been detected, vdr has given up.

 

[Bearbeiten] FILES

channels.conf
Channel configuration.
timers.conf
Timer configuration.
setup.conf
User definable setup.
commands.conf
User definable commands (executed from the Commands menu).
svdrphosts.conf
SVDRP host configuration, defining which hosts or networks are given access to the SVDRP port.
marks
Contains the editing marks defined for a recording.
info
Contains a description of the recording.
resume
Contains the index into the recording where the last replay session left off.
index
Contains the file number, offset and type of each frame of the recording.
remote.conf
Contains the key assignments for the remote control.
keymacros.conf
Contains user defined remote control key macros.
00001.ts ... 65535.ts
The actual data files of a recording.
epg.data
Contains all current EPG data. Can be used for external processing and will also be read at program startup to have the full EPG data available immediately.
.update
If this file is present in the video directory, its last modification time will be used to trigger an update of the list of recordings in the "Recordings" menu.

 

[Bearbeiten] SEE ALSO

vdr(5)

[Bearbeiten] AUTHOR

Written by Klaus Schmidinger, with contributions from many others. See the file CONTRIBUTORS in the vdr source distribution.  

[Bearbeiten] REPORTING BUGS

Report bugs to vdr-bugs@tvdr.de.  

[Bearbeiten] COPYRIGHT

Copyright © 2013 Klaus Schmidinger.

This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

Von „http://vdr-wiki.de/wiki/index.php?title=Vdr(1)&oldid=72190“