Tdk5002cctl

Aus VDR Wiki
(Unterschied zwischen Versionen)
Wechseln zu: Navigation, Suche
 
(→‎Beschreibung)
Zeile 4: Zeile 4:
  
 
Diese Software ermöglicht es auf die Funktion des Audio/Video Umschaltchip unter Linux in Betrieb zu nehmen.
 
Diese Software ermöglicht es auf die Funktion des Audio/Video Umschaltchip unter Linux in Betrieb zu nehmen.
 +
 +
 +
 +
 +
Before using the little program, ensure that you have i2c enabled in
 +
your kernel - and of course, that all necc. modules are loaded
 +
(i2c-core, i2c-dev, and i2c-i801 [for Siemens Activy])
 +
 +
==Wie benutzen==
 +
- Option '-i': Number of i2c-adapter (default:0)
 +
- Option '-a': Address of tdk5002c (default: 0x48)
 +
- Option '-d': If given, prints out only the read-register info.
 +
- Option '-s': Use a predefined register-sequence
 +
0: switch AUX-Scart to Tv-Out/Console
 +
1: switch AUX-Scart to loopthru from TV-Scart
 +
2: switch AUX-Scart to em8400 output (a+v)
 +
 +
- Writing the register one by one: You have to give the complete values (20)
 +
  for the write registers (0-4), one after the other - you have to write them
 +
  in Hex-Format.
 +
  Sample:
 +
  "MYSUPERPC> ./tdk5002cctl 0x01 0x02 0x03 0x01 0x02 0x03 0x01 0x02 0x03 0x01 0x02 0x03 0x01 0x02 0x03 0x01 0x02 0x03 0x01 0x02"
 +
 
 +
  The parameters are in the same order as in the write registers of the
 +
  TDK, order is from register 0-4, within register it's from LSB to MSB.
 +
 
 +
  You don't have to give an offset to a single parameter, e.g. if you want
 +
  to turn on "TV RGB Mute" (Bit 6 in Register 1), just give a "0x01" - or a
 +
  "0x00" if you want to turn it off. 
 +
 +
===Beispiele===
 +
"./tdk5002cctl -i 1 -a 0x50 -d": Gives only read-registers for chip 0x50 at i2c-adapter 1
 +
"./tdk5002cctl -s 2": Switches AUX-Scart to em8400 output
 +
"./tdk5002cctl -i 2 0x01 0x02 0x03 0x01 0x02 0x03 0x01 0x02 0x03 0x01 0x02 0x03 0x01 0x02 0x03 0x01 0x02 0x03 0x01 0x02":
 +
sets all parameters for tdx at i2c-adapter 2
 +
 +
===Parameter details(0-19):
 +
0) The Volume Control Attenuation for TV, Line or Mod_mono audio
 +
  Possible values: 0x00-0x3F
 +
1) TV audio mute
 +
  Possible values: 0x00-0x01
 +
2) AUX audio mute
 +
  Possible values: 0x00-0x01
 +
3) TV A/V source
 +
  Possible values: 0x00-0x07
 +
4) Aux A/V source
 +
  Possible values: 0x00-0x07
 +
5) TV RGB Mute
 +
  Possible values: 0x00-0x01
 +
6) RGB Sync Source
 +
  Possible values: 0x00-0x01
 +
7) Function Control Output Voltage
 +
  Possible values: 0x00-0x03
 +
8) Function Pin Control*
 +
  Possible values: 0x00-0x03
 +
9) RGB Gain Control
 +
  Possible values: 0x00-0x03
 +
10) BLANK output selection
 +
  Possible values: 0x00-0x03
 +
11) DO_0 output control
 +
  Possible values: 0x00-0x01
 +
12) DO_1 output control
 +
  Possible values: 0x00-0x01
 +
13) Lin/Rin Gain control
 +
  Possible values: 0x00-0x03
 +
14) TV Stereo/mono control
 +
  Possible values: 0x00-0x03
 +
15) Aux Stereo/mono control
 +
  Possible values: 0x00-0x03
 +
16) TV volume control select 1
 +
  Possible values: 0x00-0x01
 +
17) TV volume control select 2
 +
  Possible values: 0x00-0x01
 +
18) Enable 6dB gain
 +
  Possible values: 0x00-0x01
 +
19) Line Out Source
 +
  Possible values: 0x00-0x01
 +
 +
 +
 +
 +
 +
 +
 +
==Links==
 +
[http://www.arghgra.de Homepage des tdk]
 +
[http://www.uni-klu.ac.at/~akoenig/activy2003/AVPro5002C.pdf Datenblatt des TDK]
 +
[[Kategorie:Activy]]

Version vom 18. Mai 2006, 22:47 Uhr

Inhaltsverzeichnis

Beschreibung

Autor: Reiner Rosin (arghgra)

Diese Software ermöglicht es auf die Funktion des Audio/Video Umschaltchip unter Linux in Betrieb zu nehmen.



Before using the little program, ensure that you have i2c enabled in your kernel - and of course, that all necc. modules are loaded (i2c-core, i2c-dev, and i2c-i801 [for Siemens Activy])

Wie benutzen

- Option '-i': Number of i2c-adapter (default:0) - Option '-a': Address of tdk5002c (default: 0x48) - Option '-d': If given, prints out only the read-register info. - Option '-s': Use a predefined register-sequence 0: switch AUX-Scart to Tv-Out/Console 1: switch AUX-Scart to loopthru from TV-Scart 2: switch AUX-Scart to em8400 output (a+v)

- Writing the register one by one: You have to give the complete values (20) 

 for the write registers (0-4), one after the other - you have to write them
 in Hex-Format.
 Sample:
 "MYSUPERPC> ./tdk5002cctl 0x01 0x02 0x03 0x01 0x02 0x03 0x01 0x02 0x03 0x01 0x02 0x03 0x01 0x02 0x03 0x01 0x02 0x03 0x01 0x02"
 
 The parameters are in the same order as in the write registers of the
 TDK, order is from register 0-4, within register it's from LSB to MSB.
 
 You don't have to give an offset to a single parameter, e.g. if you want
 to turn on "TV RGB Mute" (Bit 6 in Register 1), just give a "0x01" - or a
 "0x00" if you want to turn it off.

Beispiele

"./tdk5002cctl -i 1 -a 0x50 -d": Gives only read-registers for chip 0x50 at i2c-adapter 1 "./tdk5002cctl -s 2": Switches AUX-Scart to em8400 output "./tdk5002cctl -i 2 0x01 0x02 0x03 0x01 0x02 0x03 0x01 0x02 0x03 0x01 0x02 0x03 0x01 0x02 0x03 0x01 0x02 0x03 0x01 0x02": sets all parameters for tdx at i2c-adapter 2

===Parameter details(0-19): 0) The Volume Control Attenuation for TV, Line or Mod_mono audio 

  Possible values: 0x00-0x3F

1) TV audio mute 

  Possible values: 0x00-0x01

2) AUX audio mute 

  Possible values: 0x00-0x01

3) TV A/V source 

  Possible values: 0x00-0x07

4) Aux A/V source 

  Possible values: 0x00-0x07

5) TV RGB Mute 

  Possible values: 0x00-0x01

6) RGB Sync Source 

  Possible values: 0x00-0x01

7) Function Control Output Voltage 

  Possible values: 0x00-0x03

8) Function Pin Control* 

  Possible values: 0x00-0x03

9) RGB Gain Control 

  Possible values: 0x00-0x03

10) BLANK output selection 

  Possible values: 0x00-0x03

11) DO_0 output control 

  Possible values: 0x00-0x01

12) DO_1 output control 

  Possible values: 0x00-0x01

13) Lin/Rin Gain control 

  Possible values: 0x00-0x03

14) TV Stereo/mono control 

  Possible values: 0x00-0x03

15) Aux Stereo/mono control 

  Possible values: 0x00-0x03

16) TV volume control select 1 

  Possible values: 0x00-0x01

17) TV volume control select 2 

  Possible values: 0x00-0x01

18) Enable 6dB gain 

  Possible values: 0x00-0x01

19) Line Out Source 

  Possible values: 0x00-0x01




Links

Homepage des tdk Datenblatt des TDK

Von „http://vdr-wiki.de/wiki/index.php?title=Tdk5002cctl&oldid=33323“