HDTV Installationsanleitung Ubuntu
Aus VDR Wiki
(Unterschied zwischen Versionen)
(→VDR 1.7.x) |
(→Xine-VDPAU) |
||
| Zeile 71: | Zeile 71: | ||
ldconfig -v | ldconfig -v | ||
</pre> | </pre> | ||
| + | |||
| + | === Xine-lib === | ||
=== Xine-UI === | === Xine-UI === | ||
Version vom 31. August 2009, 11:52 Uhr
Installationsanleitung Ubuntu 9.04
obwohl vdr-1.7.8 verfügbar ist, läuft derzeit die beschriebene Konfig mit vdr-1.7.0 am besten ...
Nvidia Installation
apt-get install build-essential xserver-xorg-dev /etc/init.d/gdm stop cd /home/deinkonto wget ftp://download.nvidia.com/XFree86/Linux-x86/185.19/NVIDIA-Linux-x86-185.19-pkg1.run #(oder neuer) sh *.run /etc/init.d/gdm start
LIB Installation
apt-get install mercurial cvs subversion libncurses-dev zlib1g-dev apt-get install autoconf libtool automake pkg-config gettext apt-get install liba52-0.7.4-dev libmp3lame-dev libvorbis-dev libpng12-dev libx11-dev libxv-dev libasound2-dev
Firmware Installation (unterschiedlich je nach Karte)
TeVii S470 DVB-S2 PCI-E :
cd /usr/local/src apt-get install unrar -y cd /usr/local/src wget http://tevii.com/Tevii_linuxdriver_0815.rar unrar x Tevii_linuxdriver_0815.rar cp tevii_linuxdriver_0815/fw/dvb-fe-cx24116.fw /lib/firmware/dvb-fe-cx24116-1.23.86.1.fw rm /lib/firmware/dvb-fe-cx24116.fw ln -s /lib/firmware/dvb-fe-cx24116-1.23.86.1.fw /lib/firmware/dvb-fe-cx24116.fw
Nova-HD-S2:
apt-get install unrar -y rm /lib/firmware/dvb-fe-c* cd /usr/local/src wget http://www.hauppauge.de/software/mce/88x_2_122_26109_WHQL.zip unzip -jo 88x_2_122_26109_WHQL.zip Driver88/hcw88bda.sys dd if=hcw88bda.sys of=dvb-fe-cx26109.fw skip=75504 bs=1 count=32501 cp dvb-fe-cx26109.fw /lib/firmware/ ln -s /lib/firmware/dvb-fe-cx26109.fw /lib/firmware/dvb/fe-cx24116.fw
Treiber Installation
cd /usr/local/src hg clone http://mercurial.intuxication.org/hg/s2-liplianin/ cd s2-liplianin cd linux/include/linux ln -s /usr/src/linux-headers-`uname -r`/include/linux/compiler.h ./ cd ../../../ make make install depmod -a reboot
Xine-VDPAU
cd /usr/local/src svn co svn://jusst.de/xine-vdpau cd xine-vdpau ./autogen.sh ./configure --prefix=/usr make make install ldconfig -v
Xine-lib
Xine-UI
cd /usr/local/src apt-get install libxt-dev libpostproc-dev wget http://home.vrweb.de/~rnissl/xine-ui-cvs-20090617220000.tar.bz2 tar xivf xine-ui-cvs-20090617220000.tar.bz2 cd xine-ui ./autogen.sh --prefix=/usr --enable-vdr-keys make make install
VDR 1.7.x
cd /usr/local/src apt-get install libfreetype6-dev libfontconfig1-dev libjpeg62-dev libcap-dev libncurses5-dev libncursesw5-dev wget ftp://ftp.cadsoft.de/vdr/Developer/vdr-1.7.0.tar.bz2 tar xivf vdr-1.7.0.tar.bz2 cd vdr-1.7.0 mv Make.config.template Make.config
vi Make.config # # User defined Makefile options for the Video Disk Recorder # # Copy this file to 'Make.config' and change the parameters as necessary. # # See the main source file 'vdr.c' for copyright information and # how to reach the author. # # $Id: Make.config.template 2.0 2008/01/13 12:54:09 kls Exp $ ### The C compiler and options: CC = gcc CFLAGS = -g -O2 -Wall CXX = g++ CXXFLAGS = -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses ifdef PLUGIN CFLAGS += -fPIC CXXFLAGS += -fPIC DEFINES += -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE endif ### The directory environment: DVBDIR = /usr/local/src/s2-liplianin/linux MANDIR = /usr/man BINDIR = /usr/bin LOCDIR = /usr/share/locale PLUGINDIR= ./PLUGINS PLUGINLIBDIR= /usr/lib/vdr/plugins VDRSCRIPTDIR= /usr/lib/vdr/scripts VIDEODIR = /var/lib/video.00 CONFDIR = /etc/vdr/ ### The remote control: LIRC_DEVICE = /dev/lircd RCU_DEVICE = /dev/ttyS1 ## Define if you want vdr to not run as root #VDR_USER = vdr
Vorbereitung:
mkdir /var/lib/video.00 mkdir -p /usr/lib/vdr/plugins mkdir -p /usr/lib/vdr/scripts mkdir -p /etc/vdr/plugins make make plugins make i18n make install locale-gen de_DE.UTF-8 de_DE dpkg-reconfigure locales cp -a svdrpsend.pl /usr/bin cp *.conf /etc/vdr/
Wer Probleme hat in der Art:
dvbdevice.c: In constructor âcDvbDevice::cDvbDevice(int)â: dvbdevice.c:487: error: âFE_CAN_2G_MODULATIONâ was not declared in this scope
# vi /usr/include/linux/dvb/frontend.h
FE_HAS_EXTENDED_CAPS = 0x800000, // We need more bitspace for newer APIs, indicate this.
// Einfuegen, anfang
FE_CAN_2G_MODULATION = 0x10000000, /* frontend supports "2nd generation modulation" (DVB-S2) */
// Einfuegen, ende
FE_NEEDS_BENDING = 0x20000000, // not supported anymore, don't use (frontend requires frequency bending)
Xineliboutput 1.0.4 (bis vdr-1.7.3)
wget http://downloads.sourceforge.net/project/xineliboutput/xineliboutput/vdr-xineliboutput-1.0.4/vdr-xineliboutput-1.0.4.tar.bz2 tar xivf vdr-xineliboutput-1.0.4.tar.bz2 mv xineliboutput* xineliboutput cd xineliboutput make make install mkdir -p /etc/vdr/plugins/xineliboutput cp *.mpg /etc/vdr/plugins/xineliboutput/ cd ../../../ make plugins make install
Xineliboutput CVS (ab vdr-1.7.4)
cd /usr/local/src/vdr-1.7.7/PLUGINS/src apt-get install libextractor-dev cvs -d:pserver:anonymous@xineliboutput.cvs.sourceforge.net:/cvsroot/xineliboutput login cvs -z3 -d:pserver:anonymous@xineliboutput.cvs.sourceforge.net:/cvsroot/xineliboutput co -P vdr-xineliboutput mv vdr-xineliboutput* xineliboutput cd xineliboutput make make install mkdir -p /etc/vdr/plugins/xineliboutput cp *.mpg /etc/vdr/plugins/xineliboutput/ cd ../../../ make plugins make install
Scripts
/var/bin/runvdr
#!/bin/bash
export VDR_LANG=de_DE
export VDR_CHARSET_OVERRIDE="ISO-8859-15"
export LANG="de_DE"
export LC_COLLATE="de_DE"
export LC_ALL="de_DE"
PATH=/usr/local/bin:$PATH
/usr/bin/amixer set 'IEC958',1 unmute
/usr/bin/touch /var/lib/video.00/.update
VDRPRG="/usr/bin/vdr"
VDRCMD="/usr/bin/vdr -c /etc/vdr -v /var/lib/video.00 -E /var/vdr -l 3 \
-s /var/bin/vdrpoweroff.sh \
-P'xineliboutput -l none -r 37890 -p' \
-u root \
$*"
KILL="/usr/bin/killall -q -TERM"
# Detect whether the DVB driver is already loaded
# and return 0 if it *is* loaded, 1 if not:
DriverLoaded()
{
return 1
}
# Load all DVB driver modules needed for your hardware:
LoadDriver ()
{
return 0
}
# Unload all DVB driver modules loaded in LoadDriver():
UnloadDriver ()
{
return 0
}
# Load driver if it hasn't been loaded already:
if ! DriverLoaded; then
LoadDriver
fi
while (true) do
eval "$VDRCMD"
if test $? -eq 0 -o $? -eq 2; then exit; fi
echo "`date` reloading DVB driver"
$KILL $VDRPRG
sleep 10
UnloadDriver
LoadDriver
echo "`date` restarting VDR"
done
/var/bin/vdrpoweroff.sh
#!/bin/bash /sbin/poweroff
/etc/init.d/vdr
#!/bin/bash
### BEGIN INIT INFO
# Provides: VDR
# Required-Start: $network
# Required-Stop: $network
# Default-Start: 3 5
# Default-Stop: 0 1 2 6
# Description: Start, Stop or Restart VDR
### END INIT INFO
# Shell functions sourced from /etc/rc.status:
# set -e
# Reset status of this service
# rc_reset
#
case "$1" in
start)
echo -n "Starting VDR "
/var/bin/runvdr > /var/log/vdr.log &
/usr/bin/irexec -d /etc/irexec.conf &
/usr/local/bin/switchtv init
;;
stop)
echo -n "Shutting down VDR "
/usr/bin/killall irexec
/usr/local/bin/switchtv kill
/usr/bin/killall runvdr
/bin/kill `/bin/pidof /usr/bin/vdr` 2>/dev/null
;;
restart)
echo -n "Restart VDR "
$0 stop
sleep 5
$0 start
;;
*)
echo "Usage: $0 {start|stop|restart}"
exit 1
;;
esac
# rc_exit
exit 0
update-rc.d vdr defaults
/usr/local/bin/switchtv
mit Umschaltung zu XBMC
#!/bin/bash
RUNAS="vdr"
run_vdr() {
killall -9 vdr-sxfe
kill_xinit
killall xbmc
killall xbmc.bin
su - $RUNAS -c "/usr/bin/xinit -e /usr/bin/vdr-sxfe --video=vdpau --post tvtime:method=use_vo_driver --audio=alsa --fullscreen --reconnect --lirc $@ &"
}
run_xbmc() {
killall -9 vdr-sxfe
kill_xinit
/usr/local/bin/scanvdr &
su - $RUNAS -c "/usr/bin/xinit -e /usr/share/xbmc/xbmc.bin -fs $@ &"
}
kill_xinit() {
/usr/bin/killall xinit
while [ true ]
do
[[ "`ps -ef | grep -v grep | grep xinit`" = "" ]] && break
done
}
if [ "$1" = "xbmc" ];then
run_xbmc
elif [ "$1" = "vdr" ];then
run_vdr
elif [ "$1" = "init" ];then
sleep 5
run_vdr
elif [ "$1" = "kill" ];then
killall -9 vdr-sxfe
killall -9 xbmc
killall -9 xbmc.bin
elif [ -z "$1" ];then
if [ "`ps -ef | grep -v grep | grep 'vdr-sxfe'`" != "" ];then
echo "VDR application is running => starting XBMC ..."
run_xbmc
elif [ "`ps -ef | grep -v grep | grep 'xbmc'`" != "" ];then
echo "XBMC application is running => starting VDR ..."
run_vdr
else
echo "no application is running => starting VDR ..."
run_vdr
fi
fi
exit 0
X
/etc/init.d/gdm (muß disabled werden)
Edit file /etc/X11/Xwrapper.config: Change this line:
allowed_users=console
to
allowed_users=anybody
# /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Fri Apr 3 13:01:52 PST 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# VendorName "Unknown"
# ModelName "Unknown"
Identifier "Monitor0"
#HorizSync 15.0 - 68.0
HorizSync 15.0 - 75.0
VertRefresh 23.0 - 61.0
Option "DPMS"
Option "ExactModeTimingsDVI" "True"
Option "UseDisplayDevice" "DFP-0"
Option "UseEDIDFreqs" "False"
# 1920x1080p @ 50Hz (EIA/CEA-861B)
ModeLine "1920x1080@50" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync
# 1920x1080p @ 60Hz (EIA/CEA-861B)
ModeLine "1920x1080@60" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
# 1920x1080p @ 24Hz (EIA/CEA-861B)
ModeLine "1920x1080@24" 74.250 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync
# 1920x1080p @ 23.976Hz (EIA/CEA-861B)
ModeLine "1920x1080@23.976" 74.175 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync
# 1920x1080i @ 50Hz (EIA/CEA-861B)
Modeline "1920x1080@50i" 74.250 1920 2448 2492 2640 1080 1085 1095 1125 +hsync +vsync Interlace
# 1920x1080i @ 60Hz (EIA/CEA-861B)
Modeline "1920x1080@60i" 74.250 1920 2008 2052 2200 1080 1085 1095 1125 +hsync +vsync Interlace
# 1920x1080p @ 59.94Hz (EIA/CEA-861B)
ModeLine "1920x1080@59.94" 148.350 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
# 1920x1080i @ 59.94Hz (EIA/CEA-861B)
Modeline "1920x1080@59.94i" 74.175 1920 2008 2052 2200 1080 1085 1095 1125 +hsync +vsync Interlace
# 1920x1080p @ 25Hz (EIA/CEA-861B)
ModeLine "1920x1080@25" 74.250 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync
# 1920x1080p @ 29.97Hz (EIA/CEA-861B)
ModeLine "1920x1080@29.97" 74.175 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
# 1920x1080p @ 30Hz (EIA/CEA-861B)
ModeLine "1920x1080@30" 74.250 1920 2008 2052 2200 1080 1084 1089 1125 +hsync
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "CustomEdid" "DFP-0:/etc/X11/edid.bin"
Option "ConnectedMonitor" "DFP-0"
Option "UseDisplayDevice" "DFP-0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "NoLogo"
Option "DynamicTwinView" "false"
Option "AllowGLXWithComposite" "True"
Option "AddARGBVisuals" "True"
Option "AddARGBGLXVisuals" "True"
Option "NoLogo" "False"
Option "RenderAccel" "True"
Option "UseEvents" "True"
Option "TripleBuffer" "True"
Option "ExactModeTimingsDVI" "True"
Option "FlatPanelProperties" "Scaling = Native"
SubSection "Display"
Depth 24
Modes "1920x1080@50" "1920x1080@24"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection
Section "Module"
Load "extmod"
Load "glx"
#Load "v4l"
EndSection
Lirc
apt-get install lirc lirc-modules-source
Beispiel mit Nova-HD-S2 IR EMpfänger:
/etc/lirc/hardware.conf
# /etc/lirc/hardware.conf # #Chosen Remote Control REMOTE="Hauppauge Nova-HD-S2" REMOTE_MODULES="" REMOTE_DRIVER="devinput" TEMPIREVENT=`ls /dev/input/by-path/ |grep event-ir` REMOTE_DEVICE="/dev/input/by-path/$TEMPIREVENT" REMOTE_LIRCD_CONF="/etc/lircd.conf" REMOTE_LIRCD_ARGS="" #Chosen IR Transmitter TRANSMITTER="None" TRANSMITTER_MODULES="" TRANSMITTER_DRIVER="" TRANSMITTER_DEVICE="" TRANSMITTER_LIRCD_CONF="" TRANSMITTER_LIRCD_ARGS="" #Enable lircd START_LIRCD="true" #Don't start lircmd even if there seems to be a good config file #START_LIRCMD="false" #Try to load appropriate kernel modules LOAD_MODULES="" # Default configuration files for your hardware if any LIRCMD_CONF="" #Forcing noninteractive reconfiguration #If lirc is to be reconfigured by an external application #that doesn't have a debconf frontend available, the noninteractive #frontend can be invoked and set to parse REMOTE and TRANSMITTER #It will then populate all other variables without any user input #If you would like to configure lirc via standard methods, be sure #to leave this set to "false" FORCE_NONINTERACTIVE_RECONFIGURATION="false" START_LIRCMD=""
/etc/lircd.conf
#This configuration has been automatically generated via
#the Ubuntu LIRC package maintainer scripts.
#
#It includes the default configuration for the remote and/or
#transmitter that you have selected during package installation.
#
#Feel free to add any custom remotes to the configuration
#via additional include directives or below the existing
#Ubuntu include directives from your selected remote and/or
#transmitter.
#Configuration for the Hauppauge Nova-T 500 remote:
#include "/usr/share/lirc/remotes/hauppauge/lircd.conf.hauppauge_novat500"
# brand: Hauppauge NOVA-HD-S2
# model no. of remote control: Hauppage NOVA-HD-S2 Snowboard Shape Silver over Black
#
begin remote
name NOVA-HD-S2
bits 16
eps 30
aeps 100
one 0 0
zero 0 0
pre_data_bits 16
pre_data 0x1
gap 199999
min_repeat 1
toggle_bit 0
begin codes
test1 0x0174
Pictures 0x016F
Go 0x0161
Text 0x0184
Sub 0x0172
Power 0x0074
TV 0x0179
Videos 0x0189
Music 0x0188
Pictures 0x00E2
Guide 0x016D
Radio 0x0181
Up 0x0067
Left 0x0069
OK 0x001C
Right 0x006A
Down 0x006C
Back 0x00AE
Menu 0x008B
Vol+ 0x0073
Vol- 0x0072
Mute 0x0071
Ch+ 0x0192
Ch- 0x0193
Record 0x00A7
FastRew 0x00A8
FastFwd 0x00D0
SkipBack 0x0195
SkipFwd 0x0197
Play 0x00CF
Pause 0x0077
Stop 0x0080
Sleep 0x008E
NextSong 0x00A3
PrevSong 0x00A5
Sorpre1 0x00D0
PrevCh 0x019C
1 0x0002
2 0x0003
3 0x0004
4 0x0005
5 0x0006
6 0x0007
7 0x0008
8 0x0009
9 0x000A
* 0x0037
0 0x000B
# 0x0029
one 0x004F
two 0x0050
three 0x0051
four 0x004B
five 0x004C
six 0x004D
seven 0x0047
eight 0x0048
nine 0x0049
ten 0x0052
Red 0x018E
Green 0x018F
Yellow 0x0190
Blue 0x0191
end codes
end remote
/etc/irexec.conf
begin prog = irexec remote = NOVA-HD-S2 button = Guide config = /usr/local/bin/switchtv & \n end
/etc/vdr/remote.conf
LIRC.Up Up LIRC.Down Down LIRC.Menu Menu LIRC.Ok OK LIRC.Back Back LIRC.Left Left LIRC.Right Right LIRC.Red Red LIRC.Green Green LIRC.Yellow Yellow LIRC.Blue Blue LIRC.0 0 LIRC.1 1 LIRC.2 2 LIRC.3 3 LIRC.4 4 LIRC.5 5 LIRC.6 6 LIRC.7 7 LIRC.8 8 LIRC.9 9 LIRC.Power Power LIRC.Volume+ Volume+ LIRC.Volume- Volume- LIRC.Mute Mute LIRC.Channel+ Ch+ LIRC.Channel- Ch- XKeySym.Up Up XKeySym.Down Down XKeySym.Menu Menu XKeySym.Ok OK XKeySym.Back Back XKeySym.Left Left XKeySym.Right Right XKeySym.Red Red XKeySym.Green Green XKeySym.Yellow Yellow XKeySym.Blue Blue XKeySym.0 0 XKeySym.1 1 XKeySym.2 2 XKeySym.3 3 XKeySym.4 4 XKeySym.5 5 XKeySym.6 6 XKeySym.7 7 XKeySym.8 8 XKeySym.9 9 XKeySym.Power Power XKeySym.Volume+ Volume+ XKeySym.Volume- Volume- XKeySym.Mute Mute XKeySym.Channel+ Ch+ XKeySym.Channel- Ch-
Audio
Vorsichthalber auf die neueste Alsa Version mit dem Script "AlsaUpgrade-1.0.x-rev-1.17.sh" upgraden und anschließend neu booten
Der User der vdr-sxfe startet muß(!) in der group "audio" sein
HDMI
Im folgenden sieht man das HDMI Device auf Card "0" Device "3"
aplay -l **** List of PLAYBACK Hardware Devices **** card 0: NVidia [HDA NVidia], device 0: ALC883 Analog [ALC883 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI] Subdevices: 0/1 Subdevice #0: subdevice #0
# vi /etc/asound.conf
pcm.!default {
type hw
card 0
device 3
}
# /etc/vdr/setup.conf xineliboutput.Audio.Port = hw:0,3 xineliboutput.Audio.Speakers = Pass Through
# ~/.xine/config_xineliboutput audio.device.alsa_front_device:default audio.device.alsa_passthrough_device:hw:0,3 audio.device.alsa_surround51_device:default audio.output.speaker_arrangement:Pass Through audio.synchronization.av_sync_method:resample audio.synchronization.force_rate:48000 audio.synchronization.resample_mode:on
XBMC
# /etc/apt/sources.list.d/xbmc.list deb http://ppa.launchpad.net/team-xbmc-svn/ppa/ubuntu jaunty main deb-src http://ppa.launchpad.net/team-xbmc-svn/ppa/ubuntu jaunty main
apt-get install xbmc
# Lircmap.xml
<lircmap>
<remote device="NOVA-HD-S2">
<power>Power</power>
<info>Red</info>
<display>Green</display>
<title>Yellow</title>
<start>Blue</start>
<skipplus>SkipFwd</skipplus>
<skipminus>SkipBack</skipminus>
<channelplus>Ch+</channelplus>
<channelminus>Ch-</channelminus>
<skipplus>NextSong</skipplus>
<skipminus>PrevSong</skipminus>
<mymusic>Music</mymusic>
<mypictures>Pictures</mypictures>
<myTV>TV</myTV>
<myvideo>Videos</myvideo>
<up>Up</up>
<left>Left</left>
<right>Right</right>
<down>Down</down>
<up>Up</up>
<select>OK</select>
<menu>Menu</menu>
<play>Play</play>
<pause>Pause</pause>
<stop>Stop</stop>
<forward>FastFwd</forward>
<reverse>FastRew</reverse>
<back>Back</back>
<zero>0</zero>
<one>1</one>
<two>2</two>
<three>3</three>
<four>4</four>
<five>5</five>
<six>6</six>
<seven>7</seven>
<eight>8</eight>
<nine>9</nine>
</remote>
</lircmap>
#/usr/local/bin/scanvdr
VDRREC="/var/lib/video.00"
TVFILE="../tvshow.nfo"
VDRINFO="info.vdr"
NFOFILE="001.nfo"
DVDTHUMB="../folder.jpg"
DVDOFFSET="18000"
DVD_XRES="1280"
DVD_YRES="720"
FANTHUMB="../fanart.jpg"
FANOFFSET="20000"
FAN_XRES="1280"
FAN_YRES="720"
if [ "$1" = "-new" ];then
echo "regenerating all files ..."
find $VDRREC -name "*.jpg" -exec rm {} \;
find $VDRREC -name "*.nfo" -exec rm {} \;
fi
VDR2JPEG="/usr/local/bin/vdr2jpeg"
for i in $(find $VDRREC -name info.vdr)
do
VDRDIR=$(dirname $i)
VDRFILE=$(basename $i)
cd $VDRDIR
if [ -f $VDRINFO ];then
AIRED=$(basename $VDRDIR | awk -F'.' '{print $1}')
DAUER=$(grep "^E " $VDRINFO | awk '{print $4/60}' | awk -F'.' '{print $1}')
TITEL=$(grep "^T " $VDRINFO | sed "s/^T //")
INHALT=$(grep "^D " $VDRINFO | sed "s/^D //")
KURZTEXT=$(grep "^S " $VDRINFO | sed "s/^S //")
if [ -z "$KURZTEXT" ];then
KURZTEXT="$TITEL"
fi
fi
echo "${TITEL}:"
echo "creating database infos ..."
COUNTREC=$(find .. -name "*.rec" | wc -l)
HTEXT=$(find .. -name $VDRINFO | sort -n | xargs cat | grep "^S " | sed "s/^S //")
if [ -z "$HTEXT" ];then
HTEXT="$DAUER min: $INHALT"
elif [ "$COUNTREC" = "1" ];then
HTEXT="[ ${HTEXT} ]
$DAUER min: $INHALT"
fi
echo "<tvshow>" > $TVFILE
echo "<title>$TITEL</title>" >> $TVFILE
echo "<plot>$HTEXT</plot>" >> $TVFILE
echo "</tvshow>" >> $TVFILE
if [ ! -f $NFOFILE ];then
echo "<episodedetails>" > $NFOFILE
echo "<title>$KURZTEXT</title>" >> $NFOFILE
echo "<rating></rating>" >> $NFOFILE
echo "<season></season>" >> $NFOFILE
echo "<episode></episode>" >> $NFOFILE
echo "<plot>$DAUER min: $INHALT</plot>" >> $NFOFILE
echo "<credits>VDR</credits>" >> $NFOFILE
echo "<director></director>" >> $NFOFILE
echo "<aired>$AIRED</aired>" >> $NFOFILE
echo "<runtime>$DAUER min</runtime>" >> $NFOFILE
echo "<actor></actor>" >> $NFOFILE
echo "</episodedetails>" >> $NFOFILE
fi
if [ -f $VDR2JPEG ];then
if [ ! -f $DVDTHUMB ];then
echo "creating DVD thumbnails ..."
$VDR2JPEG -x $DVD_XRES= -y $DVD_YRES -f $DVDOFFSET -r .
mv 000${DVDOFFSET}.jpg $DVDTHUMB
fi
if [ ! -f $FANTHUMB ];then
echo "creating FANART thumbnails ..."
$VDR2JPEG -x $FAN_XRES= -y $FAN_YRES -f $FANOFFSET -r .
mv 000${FANOFFSET}.jpg $FANTHUMB
fi
else
echo "cannot create Fanart - $VDR2JPEG not found!"
fi
echo "---"
done
