Tdk5002cctl

Version vom 18. Mai 2006, 22:56 Uhr

Beschreibung

Autor: Reiner Rosin (arghgra)

Diese Software ermöglicht es die Funktionen des Audio/Video Umschaltchip unter Linux zu nutzen.

Softwarevoraussetztungen

• lm-sensors wird benötigt
• in der Activy müssen folgende Module geladen sein
  • i2c-core
  • i2c-dev
  • i2c-i801

Wie benutzen

- Option '-i': Number of i2c-adapter (default:0) - Option '-a': Address of tdk5002c (default: 0x48) - Option '-d': If given, prints out only the read-register info. - Option '-s': Use a predefined register-sequence 0: switch AUX-Scart to Tv-Out/Console 1: switch AUX-Scart to loopthru from TV-Scart 2: switch AUX-Scart to em8400 output (a+v)

- Writing the register one by one: You have to give the complete values (20)

 for the write registers (0-4), one after the other - you have to write them
 in Hex-Format.
 Sample:
 "MYSUPERPC> ./tdk5002cctl 0x01 0x02 0x03 0x01 0x02 0x03 0x01 0x02 0x03 0x01 0x02 0x03 0x01 0x02 0x03 0x01 0x02 0x03 0x01 0x02"
 
 The parameters are in the same order as in the write registers of the
 TDK, order is from register 0-4, within register it's from LSB to MSB.
 
 You don't have to give an offset to a single parameter, e.g. if you want
 to turn on "TV RGB Mute" (Bit 6 in Register 1), just give a "0x01" - or a
 "0x00" if you want to turn it off.  

Beispiele

• ./tdk5002cctl -i 1 -a 0x50 -d

Gibt nur die read-registers für chip 0x50 am i2c-adapter 1

• ./tdk5002cctl -s 2

Schaltet AUX-Scart der Activy zum em8400 output

• ./tdk5002cctl -i 2 0x01 0x02 0x03 0x01 0x02 0x03 0x01 0x02 0x03 0x01 0x02 0x03 0x01 0x02 0x03 0x01 0x02 0x03 0x01 0x02

setzt alle parameter für tdx am i2c-adapter 2

Parameter details(0-19)

0) The Volume Control Attenuation for TV, Line or Mod_mono audio

  Possible values: 0x00-0x3F

1) TV audio mute

  Possible values: 0x00-0x01

2) AUX audio mute

  Possible values: 0x00-0x01

3) TV A/V source

  Possible values: 0x00-0x07

4) Aux A/V source

  Possible values: 0x00-0x07

5) TV RGB Mute

  Possible values: 0x00-0x01

6) RGB Sync Source

  Possible values: 0x00-0x01

7) Function Control Output Voltage

  Possible values: 0x00-0x03

8) Function Pin Control*

  Possible values: 0x00-0x03

9) RGB Gain Control

  Possible values: 0x00-0x03

10) BLANK output selection

  Possible values: 0x00-0x03

11) DO_0 output control

  Possible values: 0x00-0x01

12) DO_1 output control

  Possible values: 0x00-0x01

13) Lin/Rin Gain control

  Possible values: 0x00-0x03

14) TV Stereo/mono control

  Possible values: 0x00-0x03

15) Aux Stereo/mono control

  Possible values: 0x00-0x03

16) TV volume control select 1

  Possible values: 0x00-0x01

17) TV volume control select 2

  Possible values: 0x00-0x01

18) Enable 6dB gain

  Possible values: 0x00-0x01

19) Line Out Source

  Possible values: 0x00-0x01

Links

Homepage des tdk Datenblatt des TDK