Mainboard spezifische NVRAM Einstellungen

<a href=https://www.capemaycountyherald.com/user/vebster>MILEY CYRUS NUDE</a> https://www.capemaycountyherald.com/user/vebster - MILEY CYRUS NUDE <a href=http://riereta.net/moodle/user/view.php?id=4593&course=1>Kim Kardashian Sex</a> http://riereta.net/moodle/user/view.php?id=4593&course=1 - Kim Kardashian Sex <a href=http://jiggmin.com/forum/member.php?u=5240>amanda beard nude</a> http://jiggmin.com/forum/member.php?u=5240 - amanda beard nude

allgemeine Konfiguration

NVRAM WakeUp installieren siehe NVRAM WakeUp
NVRAM WakeUp konfigurieren siehe Mainboard spezifische Konfiguration
NVRAM WakeUp testen durch folgende Befehle

Bei verwendung von Grub

/sbin/grub-set-default 1 && nvram-wakeup -C /etc/nvram-wakeup.conf --directisa -s $(( `date +%s`+ 10*60 )) && reboot

Bei verwendung von Lilo

Text kommt noch

Dadurch wird die WakeUp Zeit auf +10 Minuten in der Zukunft gesetzt, der PC rebootet und der Boot-Loader startet den APM halt bzw. Poweroff Kernel Eintrag, welcher den PC wieder abschaltet. Nach 5 Minuten sollte der PC dann automatisch hochfahren und den VDR Eintrag im Bootloader booten.

Hinweis

NVRAM zieht von der als WakeUP Zeitpunkt angeben Zeit automatisch 5 Minuten für das Starten des PCs ab. Wird also zb. 10:20 als Wakeup Zeitpunkt übergeben, weckt NVRAM den PCs schon um 10:15.

VDR Aufnahmen können also ganz normal programmiert werden, da NVRAM die Zeit zum Hochfahren bereits berücksichtigt.

Mainboard spezifische Konfiguration

ASROCK P4i65G

Die Option --directisa muss verwendet werden.

/etc/nvram-wakeup.conf

################################################
##  Mainboard autodetection information:
##
##    - Mainboard vendor:   ""
##    - Mainboard type:     "P4i65G"
##    - Mainboard revision: "1.00"
##    - BIOS vendor:        "American Megatrends Inc."
##    - BIOS version:       "P1.30"
##    - BIOS release:       "09/08/2006"

addr_min         = 0x40
addr_sec         = 0x41
addr_day         = 0x44
shift_day        = 2
addr_hour        = 0x47
shift_hour       = 2
addr_stat        = 0x99
shift_stat       = 6
#addr_hour        = 0xA2
#shift_hour       = 2
addr_chk_h       = 0x30
addr_chk_l       = 0x31

upper_method = INTEL

ASUS M2NPV-VM

Bootloader für APM halt konfigurieren

/etc/nvram-wakeup.conf

################################################
##  Mainboard autodetection information:
##
##    - Mainboard vendor:   "ASUSTek Computer INC."
##    - Mainboard type:     "M2NPV-VM"
##    - Mainboard revision: "1.xx"
##    - BIOS vendor:        "Phoenix Technologies, LTD"
##    - BIOS version:       "ASUS M2NPV-VM ACPI BIOS Revision 0405"
##    - BIOS release:       "08/25/2006"

addr_stat        = 0x4A
shift_stat       = 3
addr_day         = 0x4C
addr_hour        = 0x4D
addr_min         = 0x4E
addr_sec         = 0x4F
addr_chk_h       = 0x6D   
addr_chk_l       = 0x6E
need_reboot      = ON_ANY_CHANGE

Biostar M7VKA

/etc/nvram-wakeup.conf

################################################
## Mainboard autodetection information:
##
## - Mainboard vendor: ""
## - Mainboard type: "M7VKA"
## - Mainboard revision: ""
## - BIOS vendor: "Award Software International, Inc."
## - BIOS version: "6.00 PG"
## - BIOS release: "10/30/2000"

addr_sec = 0x3F
addr_min = 0x40
addr_hour = 0x41
addr_stat = 0x47
shift_stat = 5
addr_day = 0x51
addr_chk_h = 0x6D
addr_chk_l = 0x6E

DFI Infinity NF4 Ultra-U

Bootloader für halt konfigurieren

/etc/nvram-wakeup.conf

################################################
##  Mainboard autodetection information:
##
##    - Mainboard vendor:   "DFI Inc."
##    - Mainboard type:     "NF4-U"
##    - Mainboard revision: ""
##    - BIOS vendor:        "Phoenix Technologies, LTD"
##    - BIOS version:       "6.00 PG"
##    - BIOS release:       "05/26/2006"

addr_stat        = 0x4A
shift_stat       = 3
addr_day         = 0x4C
addr_hour        = 0x4D
addr_min         = 0x4E
addr_sec         = 0x4F
addr_chk_h       = 0x6D
addr_chk_l       = 0x6E

Tulip TP126

/etc/nvram-wakeup.conf

################################################
##  Mainboard autodetection information:
##
##    - Mainboard vendor:   "Tulip Computers"
##    - Mainboard type:     "TP126"
##    - Mainboard revision: "AV18"
##    - BIOS vendor:        "Award Software International, Inc."
##    - BIOS version:       "6.00 PG"
##    - BIOS release:       "10/23/2001"

addr_sec         = 0x3F
addr_min         = 0x40
addr_hour        = 0x41
addr_stat        = 0x47
shift_stat       = 5
addr_day         = 0x51
addr_chk_h       = 0x6D   # guessed
addr_chk_l       = 0x6E
##upper_method = VT82Cxxx

Foxconn 6150K8MD-8EKRSH

Bootloader für halt konfigurieren

/etc/nvram-wakeup.conf

################################################
##  Mainboard autodetection information:
##
##    - Mainboard vendor:   "WinFast"
##    - Mainboard type:     "6150K8MD"
##    - Mainboard revision: "FAB1.0"
##    - BIOS vendor:        "Phoenix Technologies, LTD"
##    - BIOS version:       "6.00 PG"
##    - BIOS release:       "01/23/2006"

addr_stat        = 0x4A
shift_stat       = 3
addr_day         = 0x4C
addr_hour        = 0x4D
addr_min         = 0x4E
addr_sec         = 0x4F
addr_chk_h       = 0x6D
addr_chk_l       = 0x6E
need_reboot      = ON_ANY_CHANGE

Gigabyte GA-7N400E-L

Bootloader für halt konfigurieren

/etc/nvram-wakeup.conf

## BIOS ist Version F10!
################################################
##  Mainboard autodetection information:
##
##    - Mainboard vendor:   "Gigabyte Technology Co., Ltd."
##    - Mainboard type:     "nVidia-nForce2"
##    - Mainboard revision: "1.x"
##    - BIOS vendor:        "Award Software International, Inc."
##    - BIOS version:       "F4"
##    - BIOS release:       "08/02/2004"

addr_day         = 0x45
addr_stat        = 0x46
shift_stat       = 3
addr_hour        = 0x48
addr_min         = 0x49
addr_sec         = 0x4A
addr_chk_h       = 0x6D
addr_chk_l       = 0x6E

Gigabyte GA-8SIMLH

Bootloader für halt konfigurieren

/etc/nvram-wakeup.conf

################################################
##  Mainboard autodetection information:
##
##    - Mainboard vendor:   "Gigabyte Technology Co., Ltd."
##    - Mainboard type:     "GA-8SIMLH"
##    - Mainboard revision: "1.x"
##    - BIOS vendor:        "Award Software International, Inc."
##    - BIOS version:       "FB"
##    - BIOS release:       "10/09/2003"

addr_stat        = 0x32
addr_day         = 0x33
addr_hour        = 0x34
addr_min         = 0x35
addr_sec         = 0x36
addr_chk_h       = 0x6E
addr_chk_l       = 0x6F

IBM Intellistation E Pro 6893-120

/etc/nvram-wakeup.conf

################################################
##  Mainboard autodetection information:
##
##    - Mainboard vendor:   "IBM"
##    - Mainboard type:     "6893120"
##    - Mainboard revision: NULL
##    - BIOS vendor:        "IBM"
##    - BIOS version:       "NVKT37AGR"
##    - BIOS release:       "09/10/98"

addr_stat        = 0x9B
addr_day = 0x9a
addr_hour = 0x99
addr_min = 0x98

upper_method = VT82Cxxx
bcd = ON

MSI MS-6178

Bios Update einspielen um Shutdown Bug zu beheben
Bootloader für APM halt konfigurieren

/etc/nvram-wakeup.conf

################################################
##  Mainboard autodetection information:
##
##    - Mainboard vendor:   "MICRO-STAR INTERNATIONAL CO., LTD"
##    - Mainboard type:     "MS-6178"
##    - Mainboard revision: ""
##    - BIOS vendor:        "Award Software International, Inc."
##    - BIOS version:       "6.00 PG"
##    - BIOS release:       "05/23/2001"

addr_chk_h  = 0x6F
addr_chk_l  = 0x70
addr_stat   = 0x46
addr_day    = 0x47
addr_hour   = 0x48
addr_min    = 0x49
need_reboot = ON_STAT

MSI MS-6378

Bootloader für APM halt konfigurieren

/etc/nvram-wakeup.conf

################################################
##  Mainboard autodetection information:
##
##    - Mainboard vendor:   "MICRO-STAR INTERNATIONAL CO., LTD"
##    - Mainboard type:     "MS-6378"
##    - Mainboard revision: ""
##    - BIOS vendor:        "Award Software International, Inc."
##    - BIOS version:       "6.00 PG"
##    - BIOS release:       "05/23/2001"

addr_stat   = 0x47
shift_stat  = 5
addr_day    = 0x51
addr_hour   = 0x41
addr_min    = 0x40
addr_sec    = 0x3F
addr_chk_h  = 0x6D   # guessed
addr_chk_l  = 0x6E
need_reboot = ON_ANY_CHANGE

MSI MS-6723 (Digitainer)

Bootloader für halt konfigurieren

/etc/nvram-wakeup.conf

################################################
##  Mainboard autodetection information:
##
##    - Mainboard vendor:   "MICRO-STAR INTERNATIONAL CO., LTD"
##    - Mainboard type:     "MS-6723"
##    - Mainboard revision: ""
##    - BIOS vendor:        "Phoenix Technologies, LTD"
##    - BIOS version:       "6.00 PG"
##    - BIOS release:       "06/09/2006"

need_reboot = ON_ANY_CHANGE

addr_stat        = 0xD2
shift_stat       = 5
addr_day         = 0xD8
addr_hour        = 0xD9
addr_min         = 0xDA
addr_sec         = 0xDB

upper_method = VT8235_37

MSI MS-7181 (K8MM3-V / Rev. 2.0)

Bootloader für halt konfigurieren

/etc/nvram-wakeup.conf


################################################
##  Mainboard autodetection information:
##
##    - Mainboard vendor:   "MICRO-STAR INTERNATIONAL CO., LTD"
##    - Mainboard type:     "MS-7181"
##    - Mainboard revision: "2.0"
##    - BIOS vendor:        "Phoenix Technologies, LTD"
##    - BIOS version:       "6.00 PG"
##    - BIOS release:       "02/27/2007"

addr_stat        = 0x47
shift_stat       = 3
addr_day         = 0x48
addr_hour        = 0x49
addr_min         = 0x4A
addr_sec         = 0x4B
addr_chk_h       = 0x6D
addr_chk_l       = 0x6E
need_reboot	 = ON_ANY_CHANGE

Shuttle SK21G

Bootloader für APM halt konfigurieren

/etc/nvram-wakeup.conf

################################################
##  Mainboard autodetection information:
##
##    - Mainboard vendor:   "Shuttle Inc"
##    - Mainboard type:     "FX21V10"
##    - Mainboard revision: ""
##    - BIOS vendor:        "Phoenix Technologies, LTD"
##    - BIOS version:       "6.00 PG"
##    - BIOS release:       "11/08/2005"

need_reboot      = ON_ANY_CHANGE
addr_chk_h       = 0x6D
addr_chk_l       = 0x6E
addr_stat        = 0x47
shift_stat       = 3
addr_day         = 0x48
addr_hour        = 0x49
addr_min         = 0x4A
addr_sec         = 0x4B
upper_method = VT8235_37

VIA EPIA CN700-8237R

Bootloader für APM halt konfigurieren

/etc/nvram-wakeup.conf

################################################
##  Mainboard autodetection information:
##
##    - Mainboard vendor:   ""
##    - Mainboard type:     "CN700-8237R"
##    - Mainboard revision: ""
##    - BIOS vendor:        NULL
##    - BIOS version:       NULL
##    - BIOS release:       NULL

addr_stat        = 0x43
shift_stat       = 3
addr_day         = 0x44
addr_hour        = 0x45
addr_min         = 0x46
addr_sec         = 0x47
addr_chk_h       = 0x6D
addr_chk_l       = 0x6E
need_reboot	= ON_ANY_CHANGE

Boot-Loader konfiguration

APM halt

Grub

/boot/grub/grub.conf

default saved
timeout 1

title=VDR 
root (hd0,0)
kernel (hd0,0)/bzImage  root=/dev/hda3

title=APM halt
root (hd0,0)
savedefault 0
cat /boot/grub/default
halt

Lilo

/etc/lilo.conf

Text kommt noch

Poweroff Kernel

Grub

/boot/grub/grub.conf

Text kommt noch

Lilo

/etc/lilo.conf

Text kommt noch

Links

Mainboard spezifische NVRAM Einstellungen

Inhaltsverzeichnis

allgemeine Konfiguration

Mainboard spezifische Konfiguration

ASROCK P4i65G

ASUS M2NPV-VM

Biostar M7VKA

DFI Infinity NF4 Ultra-U

Tulip TP126

Foxconn 6150K8MD-8EKRSH

Gigabyte GA-7N400E-L

Gigabyte GA-8SIMLH

IBM Intellistation E Pro 6893-120

MSI MS-6178

MSI MS-6378

MSI MS-6723 (Digitainer)

MSI MS-7181 (K8MM3-V / Rev. 2.0)

Shuttle SK21G

VIA EPIA CN700-8237R

Boot-Loader konfiguration

APM halt

Grub

Lilo

Poweroff Kernel

Grub

Lilo

Links

Ansichten

Meine Werkzeuge

Navigation

mitmachen

links

Suche

Werkzeuge