Beschreibung
Autor: Luca Olivetti
Steuert einen Antrieb für die Satschüssel mit dem Parallelport.
Bilder
Hardwareanforderungen
- freier Parallelport
- Interface Parallelport <=> Antrieb
Schaltplan
Softwareanforderungen
Installation
Es wird davon ausgegangen, das das Plugin bereits entpackt und verlinkt wurde, siehe Plugin Installation.
cd $SOURCEDIR/VDR
patch < PLUGINS/src/actuator/patches/vdr-<VERSION>.diff
cd PLUGINS/src/actuator/module
make
cd -
make all plugins
Geladen wird das ganze laut Manual mit:
modprobe parport_pc io=0x378 irq=7
Versions-Historie
Version
|
Datum
|
Beschreibung
|
Link
|
1.1.1
|
23.03.2008
|
- Changes in SetPids call to adapt to vdr >= 1.5.11
- Added -Wno-parentheses to compiler options
|
|
1.1.0
|
19.08.2007
|
- Adapted to new localization method in vdr-1.5.7
|
|
1.0.5
|
12.08.2007
|
- Updated russian translation from Vladimir Monchenko <bob at globall ru>
- Compatibility defines in module.c and remove patches
|
|
1.0.4
|
24.06.2007
|
- check the CardIndex to identify the selected card in the main menu instead of relying on cDevice::GetDevice(index)
- added a note in README to clarify that if you select card 1 it corresponds to /dev/dvb/adapter0, 2 to /dev/dvb/adapter1 and so on
- adapted for the experimental version of vdr (1.5.X)
|
|
1.0.3
|
31.04.2006
|
- use k_Repeat for up,down,left and right
- update Makefile for compatibility with vdr >= 1.3.47
- using the cRemote::CallPlugin kludge coupled with MainThreadHook there's no need to patch vdr for position display
- setup option to select wether to display the position on satellite change or not
- remove the transponders directory from the distribution
|
|
1.0.2
|
18.01.2006
|
- russian translation with correct encoding (by Monchenko Vladimir <bob at globall ru>)
- patch for kernel >= 2.6.13 (provided by Monchenko Vladimir <bob at globall ru> and Frank Welter <frank.welter at skynet dot be>
- patches adapted to vdr-1.3.38/1.3.39
|
[1]
|
1.0.1
|
30.10.2005
|
- Simplified cPosTracker (start the thread only when needed so get rid of the cCondWait)
- Avoid tracking if the target hasn't changed after switching channels
- Added svdrp support for querying the positioner status
- return osContinue to avoid auto closing by main vdr loop
- use MAXLANGCODE2
|
|
1.0.0
|
07.08.2005
|
- It's been working for a year, let's call it 1.0.0 ;-)
- Save channels after a transponder/satellite scan
- New menu entries to mark, unmark and delete marked channels ("mark" means prepending '+' to the name to aid finding stale channel entries)
- After a satellite scan the transponder index was reset at 1 but the pointer was NULL. Fixed to point at the first transponder.
- Added a note in module/README about possible problems with irq7 (as reported by Frank Welter)
- fixed test.py (in the module subdirectory) to work with python 2.4
- wrap-around menu
- themes support
- use setup settings for osd position and width
|
|
0.0.9
|
31.03.2005
|
- Dutch translation by Johan Schuring <vetteblei at gmail dot com>
- Fast transponder/satellite scan, thanks to the wonderful work of Thomas Bergwinkl <bergwinkl.thomas at vr-web dot de> who provided filter.[ch] to make it possible
|
[2]
|
0.0.8
|
13.02.2005
|
- Implement new (in vdr-1.3.20) method Stop
- Removed the note about the dxr3 shutdown problem (saving the dish position early with the Stop method makes the problem irrelevant)
- Skip non satellite sources in main menu
- Changed pid assignment in cMainMenuActuator::Tune() to (hopefully) avoid problems with the new audio pid management in vdr
- Added "Scan satellite" option (idea shamelessly stolen from kikko77 at altervista dot org, author of the channelscan plugin)
- Changed the 'position-display' patch (adapted for vdr-1.3.20 and avoids overwriting the osd of the newly entered channel number if the dish is moving)
- New parameter MinRefresh, to avoid screen artifacts with a dxr3
|
[3]
|
0.0.7
|
06.02.2005
|
- Added the possibility to specify vpid and apid when tuning to a transponder.
- Added some logic to show the tuned channel (I'm not sure it is right but "it works here"(tm))
- Added the "steerable" and "sort-by-source" patch
- Show signal information like the femon plugin (i.e. show signal strength and snr as raw value and percentage, show ber and unc)
- Added catalan translation
|
[4]
|
0.0.6
|
09.01.2005
|
- New version for vdr 1.3.18
- Note in README that the solution to the dxr3 shutdown problem is only a workaround and not the definitive solution
|
|
0.0.5
|
18.10.2004
|
- Kernel module: added parameter description
- Fixed compilation error for vdr 1.3.13
|
[5]
|
0.0.4
|
30.08.2004
|
- Kernel module: corrected and revised use of lock (now an rwlock) to use the irqsave/irqrestore version in non interrupt code (doh!).
- Kernel module: added sysfs support
- Corrected calculation of signal strength and snr (now it should really give the same values as the rotor plugin)
- Removed unneded cMenuEditIntpItem
- Take into accunt which card is connected to the steerable dish (doh!)
- Added a note in README about the problems with vdr in multi card setups and the dxr3 plugin
- Cannot use the frontend directly to tune a new transponder, use ChannelSwitch instead.
|
|
0.0.3
|
20.08.2004
|
- I reversed the parameter meaning between DrawRectangle and DrawText that lead to some error messages not being shown. Fixed.
- Loading of the position at startup where it belongs: in cPosTracker
- workaround for Setup.UpdateChannels moved to cPosTracker
|
[6]
|
0.0.2
|
14.08.2004
|
- Kernel module: setting the position and immediatiely setting a target with the same position would result in the module sticking in the ACM_REACHED state. Hopefully fixed.
- Kernel module: now setting a new target clears the ACM_REACHED state.
- Set the current position at initialization only if the module has just been loaded (position 0), otherwise trust the position stored in the driver.
- Moved position storing in separate thread
- OSD cleanup
- Modfied patch to not mess up channel switching while the dish is moving
|
[7]
|
0.0.1
|
11.08.2004
|
|
[8]
|
Links
- Homepage des Plugins