Vdr(1)

vdr(1) - Linux man page

Section: Video Disk Recorder (1)
Updated: 31 Mar 2013

---

 

NAME

vdr - the Video Disk Recorder  

SYNOPSIS

vdr [options]  

DESCRIPTION

vdr implements a complete digital Set-Top Box and Video Recorder. It can work with signals received from satellites (DVB-S) as well as cable (DVB-C) and terrestrial (DVB-T) signals.

At least one DVB card is required to run vdr. With it you can watch live TV while recording one or more other broadcasts from the same transponder. It is also possible to start watching a recorded programme before the live broadcast has ended (time shifting). In order to record from different transponders simultaneously two or more DVB cards are necessary. By default vdr can support up to eight DVB cards. The primary DVB card (the one your TV set is connected to) can either be a "full featured" card, which means it contains an MPEG decoder and provides audio and video signal outputs, or you can use some third party plugin that implements software decoding of the MPEG data and displays it via the system's graphics adapter.

vdr uses an On Screen Display (OSD) to display its menus. It can be controlled by the PC keyboard, the "Linux Infrared Remote Control" (LIRC), or any other means of remote control, implemented by a third party plugin.

Remote access is possible via the "Simple Video Disk Recorder Protocol" (SVDRP), which can be accessed on port 6419, for instance by telnet.  

OPTIONS

-a cmd, --audio=cmd

Send Dolby Digital audio to stdin of command cmd.

--cachedir=dir

Save cache files in dir (default is to save them in the video directory).

-c dir, --config=dir

Read config files from directory dir (default is to read them from the video directory).

-d, --daemon

Run in daemon mode (implies --no-kbd).

-D num, --device=num

Use only the given DVB device (num = 0, 1, 2...). There may be several -D options (by default all DVB devices will be used).

--dirnames=path[,name[,enc]]

Set the maximum directory path length to path (default is the maximum value allowed on the system). If name is also given, it defines the maximum directory name length (default is the maximum value allowed on the system). The optional enc can be 0 or 1, and controls whether special characters in directory names are encoded as hex values (default: 0). If path or name are left empty (as in ",,1" to only set enc), the defaults apply. The length of the video directory name and that of the actual recording directory is subtracted from path, to make sure the directory path will never become too long.

--edit=rec

Edit the given recording. rec must be the full path name of an existing recording. The program will return immediately after editing the recording.

-E file, --epgfile=file

Write the EPG data into the given file (default is epg.data in the cache directory). Use -E- to disable this. If file is a directory, the file epg.data will be created in that directory.

--filesize=size

Limit video files to size bytes (default is 2000M). This option is only useful in conjunction with --edit, and must precede that option to have an effect. size is an integer number and may be followed by one of the letters K, M, G or T to abbreviate Kilo-, Mega-, Giga- or Terabyte, respectively. The given value is silently limited to the program's internal minimum and maximum values.

--genindex=rec

Generate the index file for the given recording. rec must be the full path name of an existing recording. The recording must be in TS format. If the recording already has an index file, it will be deleted before creating the new one. The program will return immediately after generating the index. Note that using this option while another instance of VDR is currently replaying the given recording, or if the recording has not been finished yet, may lead to unexpected results.

-g, --grab=dir

Write images from the SVDRP command GRAB into the given directory dir. dir must be the full path name of an existing directory, without any "..", double '/' or symlinks. By default, or if -g- is given, grabbing images to disk is disabled.

-h, --help

Print a help message and exit.

-i instance, --instance=instance

Use instance as the id of this VDR instance (default is 0). In an environment where several instances of VDR use the same video directory, this parameter can be set to a positive integer value that's unique for each instance, so that they won't interfere with each other in case they record exactly the same broadcast. The number given here will be part of the directory name in which the recordings will be stored.

-l level, --log=level

Set logging to level. 0 = no logging, 1 = errors only, 2 = errors and info, 3 = errors, info and debug. The default logging level is 3. If logging should be done to LOG_LOCALn instead of LOG_USER, add '.n' to LEVEL, as in 3.7 (n=0..7).

-L dir, --lib=dir

Search for plugins in directory dir (default is ./PLUGINS/lib). There can be several -L options with different dir values. Each of them will apply to the -P options following it.

--lirc[=path]

Use a LIRC remote control device. If path is omitted, vdr uses /var/run/lirc/lircd.

--localedir=dir

Search for locale files in dir (default is ./locale).

-m, --mute

Mute audio of the primary DVB device at startup.

--no-kbd

Don't use the keyboard as an input device.

-p port, --port=port

Use port for SVDRP. A value of 0 turns off SVDRP. The default SVDRP port is 6419. You need to edit the file svdrphosts.conf in order to enable access to the SVDRP port.

-P options, --plugin=options

Load a plugin, defined by the given options. The first word in options must be the name of an existing vdr plugin, optionally followed by a blank separated list of command line options for that plugin. If options contains any blanks, you need to enclose it in quotes, like for example vdr -P "abc -a -b xyz"which would load a plugin named abc, giving it the command line options -a -b xyz. If you want to load all available plugins (without any particular options) you can usevdr -P "*"(note the quotes around the asterisk to prevent wildcard expansion).

-r cmd, --record=cmd

Call cmd before and after a recording. See the file INSTALL for more information.

--resdir=dir

Read resource files from dir (default is to read them from the config directory).

-s cmd, --shutdown=cmd

Call cmd to shutdown the computer. See the file INSTALL for more information.

--split

Split edited files at the editing marks. This option is only useful in conjunction with --edit, and must precede that option to have an effect.

-t tty, --terminal=tty

Set the controlling terminal.

-u user, --user=user

Run as user user in case vdr was started as user 'root'. Starting vdr as 'root' is necessary if the system time shall be set from the transponder data, but for security reasons vdr can switch to a lesser privileged user id during normal operation.

--userdump

Allow coredumps if -u is given (only for debugging).

--vfat

For backwards compatibility (same as --dirnames= 250,40,1.

-v dir, --video=dir

Use dir as video directory. The default is /video.

-V, --version

Print version information and exit.

-w sec, --watchdog=sec

Activate the watchdog timer with a timeout of sec seconds. A value of 0 (default) disables the watchdog.

 

SIGNALS

SIGINT, SIGTERM

Program exits with status 0.

SIGHUP

Program exits with status 1. This can be used to force a reload, for example if an update has been installed.

 

EXIT STATUS

0

Successful program execution.

1

An error has been detected which requires the DVB driver and vdr to be reloaded.

2

An non-recoverable error has been detected, vdr has given up.

 

FILES

channels.conf

Channel configuration.

timers.conf

Timer configuration.

setup.conf

User definable setup.

commands.conf

User definable commands (executed from the Commands menu).

svdrphosts.conf

SVDRP host configuration, defining which hosts or networks are given access to the SVDRP port.

marks

Contains the editing marks defined for a recording.

info

Contains a description of the recording.

resume

Contains the index into the recording where the last replay session left off.

index

Contains the file number, offset and type of each frame of the recording.

remote.conf

Contains the key assignments for the remote control.

keymacros.conf

Contains user defined remote control key macros.

00001.ts ... 65535.ts

The actual data files of a recording.

epg.data

Contains all current EPG data. Can be used for external processing and will also be read at program startup to have the full EPG data available immediately.

.update

If this file is present in the video directory, its last modification time will be used to trigger an update of the list of recordings in the "Recordings" menu.

 

SEE ALSO

vdr(5)

AUTHOR

Written by Klaus Schmidinger, with contributions from many others. See the file CONTRIBUTORS in the vdr source distribution.  

REPORTING BUGS

Report bugs to vdr-bugs@tvdr.de.  

COPYRIGHT

Copyright © 2013 Klaus Schmidinger.

This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.