Ubuntu HD VDR mittels Xine und VDPAU - Grafikkarten Treiber

Aus VDR Wiki
(Unterschied zwischen Versionen)
Wechseln zu: Navigation, Suche
(Download qvdpautest)
(Download qvdpautest und benötigter Pakete)
 
(45 dazwischenliegende Versionen von 11 Benutzern werden nicht angezeigt)
Zeile 1: Zeile 1:
 +
==Vorwort==
 +
Es wird der in Ubuntu mitgelieferte NVIDIA Grafikkartentreiber verwendet.
 +
 
==Prüfen der Grafikkarte==
 
==Prüfen der Grafikkarte==
 
  lspci -v
 
  lspci -v
Zeile 4: Zeile 7:
 
  03:00.0 VGA compatible controller: nVidia Corporation ION VGA (rev b1)
 
  03:00.0 VGA compatible controller: nVidia Corporation ION VGA (rev b1)
 
  Subsystem: ASUSTeK Computer Inc. Device 83e2
 
  Subsystem: ASUSTeK Computer Inc. Device 83e2
  Flags: bus master, fast devsel, latency 0, IRQ 23
+
  Flags: bus master, fast devsel, latency 0, IRQ 20
 
  Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
 
  Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
 
  Memory at e0000000 (64-bit, prefetchable) [size=256M]
 
  Memory at e0000000 (64-bit, prefetchable) [size=256M]
 
  Memory at f6000000 (64-bit, prefetchable) [size=32M]
 
  Memory at f6000000 (64-bit, prefetchable) [size=32M]
 
  I/O ports at dc00 [size=128]
 
  I/O ports at dc00 [size=128]
  [virtual] Expansion ROM at fbee0000 [disabled] [size=128K]
+
  Expansion ROM at fbee0000 [disabled] [size=128K]
  Capabilities: <access denied>  
+
  Capabilities: <access denied>
  Kernel driver in use: nvidia
+
  Kernel driver in use: nouveau
  Kernel modules: nvidia-current, nvidiafb, nouveau
+
  Kernel modules: nvidiafb, nouveau
  
==Installation NVIDIA Grafikkarten Treiber==
+
==libvdpau installieren==
 +
sudo apt-get install libvdpau1 libvdpau-dev
 +
 
 +
==NVIDIA Treiber installieren==
 
  sudo apt-get install nvidia-current
 
  sudo apt-get install nvidia-current
 +
sudo init 6
 +
 +
===xorg.conf erstellen===
 
  sudo nvidia-xconfig
 
  sudo nvidia-xconfig
  
==System neu starten==
+
===System neu starten===
 
  sudo init 6
 
  sudo init 6
  
==Beispiel xorg.conf==
+
YMMD with that awnser! TX
 +
 
 +
===edid.bin erstellen===
 +
Nachdem das System neu gestartet wurde kann unter der grafischen Oberfläche das NVIDIA Konfigurationsmenü aufgerufen werden.
 +
 
 +
* Anwendungen -> Zubehör -> Terminal
 +
 
 +
sudo nvidia-settings
 +
 
 +
GPU-0 -> DFP-0 -> Acquire EDID...
 +
 
 +
Die erstellte Datei unter folgendem Pfad ablegen:
 +
 
 +
/etc/X11/edid.bin
 +
 
 +
Falls Ihr die edid.bin nicht direkt unter /etc/X11 abspeichern könnt speichert diese vorerst unter /tmp und kopiert diese dann manuell nach /etc/X11:
 +
 
 +
sudo cp /tmp/edid.bin /etc/X11
 +
 
 +
==xorg.conf anpassen==
 
Gegebenfalls müsst Ihr eure xorg.conf auf eure Grafikkarte und TV anpassen. Anbei findet Ihr meine xorg.conf.  
 
Gegebenfalls müsst Ihr eure xorg.conf auf eure Grafikkarte und TV anpassen. Anbei findet Ihr meine xorg.conf.  
  
Zeile 41: Zeile 69:
 
   
 
   
 
  Section "Files"
 
  Section "Files"
 +
EndSection
 +
 +
Section "Extensions"
 +
    Option "Composite" "Disable"
 
  EndSection
 
  EndSection
 
   
 
   
Zeile 67: Zeile 99:
 
     VertRefresh    23.0 - 61.0
 
     VertRefresh    23.0 - 61.0
 
     Option        "DPMS"
 
     Option        "DPMS"
    Option        "UseDisplayDevice" "DFP-0"
 
    Option        "ExactModeTimingsDVI" "True"
 
    Option        "UseEDIDFreqs" "False"
 
 
     ModeLine      "1920x1080@50" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync
 
     ModeLine      "1920x1080@50" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync
 
     ModeLine      "1920x1080@60" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
 
     ModeLine      "1920x1080@60" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
    ModeLine      "1920x1080@24" 74.250 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync
 
    ModeLine      "1920x1080@23.976" 74.175 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync
 
    ModeLine      "1920x1080@50i" 74.200 1920 1964 2052 2200 1080 1084 1088 1125 +hsync -vsync interlace
 
    ModeLine      "1920x1080@60i" 74.250 1920 2008 2052 2200 1080 1085 1095 1125 +hsync +vsync interlace
 
    ModeLine      "1920x1080@59.94" 148.350 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
 
    ModeLine      "1920x1080@59.94i" 74.175 1920 2008 2052 2200 1080 1085 1095 1125 +hsync +vsync interlace
 
    ModeLine      "1920x1080@25" 74.250 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync
 
    ModeLine      "1920x1080@29.97" 74.175 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
 
    ModeLine      "1920x1080@30" 74.250 1920 2008 2052 2200 1080 1084 1089 1125 +hsync
 
 
  EndSection
 
  EndSection
 
   
 
   
Zeile 88: Zeile 108:
 
     VendorName    "NVIDIA Corporation"
 
     VendorName    "NVIDIA Corporation"
 
     BoardName      "ION"
 
     BoardName      "ION"
 +
    Option        "Coolbits" "1"
 +
    Option        "NoLogo" "True"
 +
    Option        "UseEDIDDpi" "False"
 +
    Option        "CustomEdid" "DFP-0:/etc/X11/edid.bin"
 +
    Option        "ConnectedMonitor" "DFP-0"
 +
    Option   "UseDisplayDevice" "DFP-0"
 +
    Option        "ExactModeTimingsDVI" "True"
 +
    Option        "ModeValidation" "DFP-0: AllowNon60HzDFPModes,NoEdidModes,NoVesaModes,NoXServerModes,NoPredefinedModes,NoDFPNativeResolutionCheck,NoHorizSyncCheck,NoVertRefreshCheck"
 
  EndSection
 
  EndSection
+
 
 
  Section "Screen"
 
  Section "Screen"
 
     Identifier    "Screen0"
 
     Identifier    "Screen0"
Zeile 100: Zeile 128:
 
         Depth      24
 
         Depth      24
 
     EndSubSection
 
     EndSubSection
EndSection
 
 
Section "Extensions"
 
    Option        "Composite" "Disable"
 
 
  EndSection
 
  EndSection
  
Zeile 126: Zeile 150:
 
  mkdir -p /data/installfiles/qvdpautest
 
  mkdir -p /data/installfiles/qvdpautest
  
===Download qvdpautest===
+
===Download qvdpautest und benötigter Pakete===
 +
apt-get update
 +
apt-get install qt4-qmake qt4-dev-tools libvdpau-dev libvdpau1
 +
 
 
  cd /data/installfiles/qvdpautest
 
  cd /data/installfiles/qvdpautest
 
  wget http://hftom.free.fr/qvdpautest-0.5.1.tar.gz
 
  wget http://hftom.free.fr/qvdpautest-0.5.1.tar.gz
Zeile 132: Zeile 159:
 
===Installation von qvdpautest===
 
===Installation von qvdpautest===
 
  cd /tmp
 
  cd /tmp
  tar -xzf /data/installfiles/qvdpautest/qvdpautest-0.5.tar.gz
+
  tar -xzf /data/installfiles/qvdpautest/qvdpautest-0.5.1.tar.gz
  cd qvdpautest
+
  cd qvdpautest-0.5.1/
 
  qmake
 
  qmake
 
  make
 
  make
  
 
===qvdpautest starten===
 
===qvdpautest starten===
 +
'''Achtung!''' Das Programm muss auf der grafischen Oberfläche (X-Server) gestartet werden.
 +
 
  cd /tmp/qvdpautest/
 
  cd /tmp/qvdpautest/
 
  ./qvdpautest
 
  ./qvdpautest
  
 
===ermittelte Leistungsdaten===
 
===ermittelte Leistungsdaten===
  Intel(R) Core(TM)2 Duo CPU     E8400 @ 3.00GHz
+
qvdpautest 0.5.1
  NVIDIA GPU GeForce GT 220 (GT216) at PCI:1:0:0 (GPU-0)
+
  Intel(R) Atom(TM) CPU  330  @ 1.60GHz
 +
  NVIDIA GPU ION (C79) at PCI:3:0:0 (GPU-0)
 
   
 
   
 
  VDPAU API version : 1
 
  VDPAU API version : 1
  VDPAU implementation : NVIDIA VDPAU Driver Shared Library  190.53  Wed Dec 9 16:28:38 PST 2009
+
  VDPAU implementation : NVIDIA VDPAU Driver Shared Library  260.19.06 Mon Sep 13 04:58:44 PDT 2010
 
   
 
   
  SURFACE GET BITS: 1095.34 M/s
+
  SURFACE GET BITS: 227.721 M/s
  SURFACE PUT BITS: 1159.63 M/s
+
  SURFACE PUT BITS: 176.326 M/s
 
   
 
   
  MPEG DECODING (1920x1080): 72 frames/s
+
  MPEG DECODING (1920x1080): 57 frames/s
  MPEG DECODING (1280x720): 163 frames/s
+
  MPEG DECODING (1280x720): 135 frames/s
  H264 DECODING (1920x1080): 65 frames/s
+
  H264 DECODING (1920x1080): 53 frames/s
  H264 DECODING (1280x720): 135 frames/s
+
  H264 DECODING (1280x720): 106 frames/s
  VC1 DECODING (1440x1080): 47 frames/s
+
  VC1 DECODING (1440x1080): 69 frames/s
 
   
 
   
  MIXER WEAVE (1920x1080): 633 frames/s
+
  MIXER WEAVE (1920x1080): 315 frames/s
  MIXER BOB (1920x1080): 1113 fields/s
+
  MIXER BOB (1920x1080): 417 fields/s
  MIXER TEMPORAL (1920x1080): 303 fields/s
+
  MIXER TEMPORAL (1920x1080): 119 fields/s
  MIXER TEMPORAL + IVTC (1920x1080): 199 fields/s
+
  MIXER TEMPORAL + IVTC (1920x1080): 76 fields/s
  MIXER TEMPORAL + SKIP_CHROMA (1920x1080): 396 fields/s
+
  MIXER TEMPORAL + SKIP_CHROMA (1920x1080): 162 fields/s
  MIXER TEMPORAL_SPATIAL (1920x1080): 150 fields/s
+
  MIXER TEMPORAL_SPATIAL (1920x1080): 34 fields/s
  MIXER TEMPORAL_SPATIAL + IVTC (1920x1080): 118 fields/s
+
  MIXER TEMPORAL_SPATIAL + IVTC (1920x1080): 28 fields/s
  MIXER TEMPORAL_SPATIAL + SKIP_CHROMA (1920x1080): 171 fields/s
+
  MIXER TEMPORAL_SPATIAL + SKIP_CHROMA (1920x1080): 38 fields/s
  MIXER TEMPORAL_SPATIAL (720x576 video to 1920x1080 display): 490 fields/s
+
  MIXER TEMPORAL_SPATIAL (720x576 video to 1920x1080 display): 128 fields/s
MIXER TEMPORAL_SPATIAL + HQSCALING (720x576 video to 1920x1080 display): 283 fields/s
+
 
   
 
   
  MULTITHREADED MPEG DECODING (1920x1080): 0 frames/s
+
  MULTITHREADED MPEG DECODING (1920x1080): 59 frames/s
  MULTITHREADED MIXER TEMPORAL (1920x1080): 266 fields/s
+
  MULTITHREADED MIXER TEMPORAL (1920x1080): 100 fields/s
  
 
==Links==
 
==Links==
Zeile 175: Zeile 204:
 
# [ftp://download.nvidia.com/XFree86/ NVIDIA FTP-Server]
 
# [ftp://download.nvidia.com/XFree86/ NVIDIA FTP-Server]
  
[[Kategorie:Ubuntu]]
+
[[Kategorie:Ubuntu HD VDR mittels Xine und VDPAU]]
[[Kategorie:Installationsanleitungen]]
+
[[Kategorie:HDTV]]
+

Aktuelle Version vom 5. Januar 2012, 15:54 Uhr

Inhaltsverzeichnis

[Bearbeiten] Vorwort

Es wird der in Ubuntu mitgelieferte NVIDIA Grafikkartentreiber verwendet.

[Bearbeiten] Prüfen der Grafikkarte

lspci -v

03:00.0 VGA compatible controller: nVidia Corporation ION VGA (rev b1)
	Subsystem: ASUSTeK Computer Inc. Device 83e2
	Flags: bus master, fast devsel, latency 0, IRQ 20
	Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
	Memory at e0000000 (64-bit, prefetchable) [size=256M]
	Memory at f6000000 (64-bit, prefetchable) [size=32M]
	I/O ports at dc00 [size=128]
	Expansion ROM at fbee0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: nouveau
	Kernel modules: nvidiafb, nouveau

[Bearbeiten] libvdpau installieren

sudo apt-get install libvdpau1 libvdpau-dev

[Bearbeiten] NVIDIA Treiber installieren

sudo apt-get install nvidia-current
sudo init 6

[Bearbeiten] xorg.conf erstellen

sudo nvidia-xconfig

[Bearbeiten] System neu starten

sudo init 6

YMMD with that awnser! TX

[Bearbeiten] edid.bin erstellen

Nachdem das System neu gestartet wurde kann unter der grafischen Oberfläche das NVIDIA Konfigurationsmenü aufgerufen werden.

  • Anwendungen -> Zubehör -> Terminal
sudo nvidia-settings
GPU-0 -> DFP-0 -> Acquire EDID...

Die erstellte Datei unter folgendem Pfad ablegen:

/etc/X11/edid.bin

Falls Ihr die edid.bin nicht direkt unter /etc/X11 abspeichern könnt speichert diese vorerst unter /tmp und kopiert diese dann manuell nach /etc/X11:

sudo cp /tmp/edid.bin /etc/X11

[Bearbeiten] xorg.conf anpassen

Gegebenfalls müsst Ihr eure xorg.conf auf eure Grafikkarte und TV anpassen. Anbei findet Ihr meine xorg.conf.

Zu finden unter:

cd /etc/X11
sudo vi xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildd@yellow)  Fri Apr  9 11:51:21 UTC 2010

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "Extensions"
    Option "Composite" "Disable"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "DON DENON-AVAMP"
    HorizSync       15.0 - 68.0
    VertRefresh     23.0 - 61.0
    Option         "DPMS"
    ModeLine       "1920x1080@50" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync
    ModeLine       "1920x1080@60" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "ION"
    Option         "Coolbits" "1"
    Option         "NoLogo" "True"
    Option         "UseEDIDDpi" "False"
    Option         "CustomEdid" "DFP-0:/etc/X11/edid.bin"
    Option         "ConnectedMonitor" "DFP-0"
    Option	   "UseDisplayDevice" "DFP-0"
    Option         "ExactModeTimingsDVI" "True"
    Option         "ModeValidation" "DFP-0: AllowNon60HzDFPModes,NoEdidModes,NoVesaModes,NoXServerModes,NoPredefinedModes,NoDFPNativeResolutionCheck,NoHorizSyncCheck,NoVertRefreshCheck"
EndSection
 
Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "1920x1080_50 +0+0; nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

[Bearbeiten] System neu starten

sudo init 6

[Bearbeiten] Prüfen ob der Bildschirm richtig angesteuert wird

Es ist wichtig das euer LCD Bildschirm mit 50 Hz angesteuert wird. Es kann folgendermaßen geprüft werden:

DISPLAY=:0 nvidia-settings --query RefreshRate

Attribute 'RefreshRate' (vdr:0.0; display device: DFP-1): 50,00 Hz.
'RefreshRate' is an integer attribute.
'RefreshRate' is a read-only attribute.
'RefreshRate' is display device specific.
'RefreshRate' can use the following target types: X Screen, GPU.

[Bearbeiten] Leistungsdaten der Grafikkarte ermitteln

Mit dem Benchmarktool "qvdpautest" können die Leistungsdaten der Grafikkarte ermittelt werden.

[Bearbeiten] Downloadverzeichnis vorbereiten

mkdir -p /data/installfiles/qvdpautest

[Bearbeiten] Download qvdpautest und benötigter Pakete

apt-get update
apt-get install qt4-qmake qt4-dev-tools libvdpau-dev libvdpau1
cd /data/installfiles/qvdpautest
wget http://hftom.free.fr/qvdpautest-0.5.1.tar.gz

[Bearbeiten] Installation von qvdpautest

cd /tmp
tar -xzf /data/installfiles/qvdpautest/qvdpautest-0.5.1.tar.gz
cd qvdpautest-0.5.1/
qmake
make

[Bearbeiten] qvdpautest starten

Achtung! Das Programm muss auf der grafischen Oberfläche (X-Server) gestartet werden.

cd /tmp/qvdpautest/
./qvdpautest

[Bearbeiten] ermittelte Leistungsdaten

qvdpautest 0.5.1
Intel(R) Atom(TM) CPU  330   @ 1.60GHz
NVIDIA GPU ION (C79) at PCI:3:0:0 (GPU-0)

VDPAU API version : 1
VDPAU implementation : NVIDIA VDPAU Driver Shared Library  260.19.06  Mon Sep 13 04:58:44 PDT 2010

SURFACE GET BITS: 227.721 M/s
SURFACE PUT BITS: 176.326 M/s

MPEG DECODING (1920x1080): 57 frames/s
MPEG DECODING (1280x720): 135 frames/s
H264 DECODING (1920x1080): 53 frames/s
H264 DECODING (1280x720): 106 frames/s
VC1 DECODING (1440x1080): 69 frames/s

MIXER WEAVE (1920x1080): 315 frames/s
MIXER BOB (1920x1080): 417 fields/s
MIXER TEMPORAL (1920x1080): 119 fields/s
MIXER TEMPORAL + IVTC (1920x1080): 76 fields/s
MIXER TEMPORAL + SKIP_CHROMA (1920x1080): 162 fields/s
MIXER TEMPORAL_SPATIAL (1920x1080): 34 fields/s
MIXER TEMPORAL_SPATIAL + IVTC (1920x1080): 28 fields/s
MIXER TEMPORAL_SPATIAL + SKIP_CHROMA (1920x1080): 38 fields/s
MIXER TEMPORAL_SPATIAL (720x576 video to 1920x1080 display): 128 fields/s

MULTITHREADED MPEG DECODING (1920x1080): 59 frames/s
MULTITHREADED MIXER TEMPORAL (1920x1080): 100 fields/s

[Bearbeiten] Links

  1. NVIDIA
  2. NVIDIA FTP-Server